


Lime or acrylic polished plaster comes down to the wall and the room. Lime based polished plaster breathes, ages gently and suits solid masonry in older homes, while acrylic polished plaster forms a tougher surface film that can suit modern plasterboard and busy commercial spaces. Zavoré installs both with our own artisans in London, Birmingham, Manchester and across the UK, and recommends one only after a survey.
For a fuller picture of the finish, our page on polished plaster explains how the sheen is built in thin, burnished layers. If you want to know where we work, see Venetian plastering across the UK.
Every polished plaster is a binder, a fine filler such as crushed marble, pigment and water. In a lime system the binder is slaked lime. As it dries it slowly takes carbon dioxide from the air and turns back towards limestone, which is why a lime wall seems to harden and mellow over months. The surface stays open, so water vapour can pass through.
In an acrylic system the binder is a synthetic resin. It dries by losing water and the resin particles knit into a continuous film. That film is flexible and fairly hard wearing, but it also closes the surface, so moisture inside the wall has less chance to escape.
To the eye, a skilled finish in either can look superb. Lime tends to have a slightly deeper, cloudier movement and a cooler touch. Acrylic can look a little more even and uniform. Many people could not tell them apart on a sample board, which is why the decision should rest on the building rather than on looks alone.
For Victorian terraces, Georgian townhouses, Edwardian semis, stone cottages and barns, lime is usually the right answer. These houses were built with solid walls that take on moisture and give it back. Wrap them in a sealed film and that moisture can collect behind it and cause blistering, staining or damp patches. Lime works with the wall instead of against it, and it sits comfortably next to old lime plaster.
Listed buildings add another consideration. Listed building consent is generally needed for works that affect a listed building's character, so check with your local planning authority before choosing any finish for a protected property.
Acrylic earns its place in modern buildings. New build flats and houses usually have plasterboard walls on timber or metal studs, with no need for the wall to breathe in the way solid masonry does. Offices, shops, hotel corridors and restaurant walls take knocks from bags, trolleys and chairs, and the extra toughness of a resin film can help there. Acrylic can also be a little more tolerant in rooms that see regular wiping.
Even so, plasterboard still needs proper preparation. The joints should be reinforced and the correct primer applied, otherwise the joints can telegraph through a sheen or crack later. That is true for lime and acrylic alike.
Cleaning. Both are cleaned gently with a soft, damp cloth once waxed or sealed. Acrylic copes a little better with frequent wiping.
Repairs. Lime is very forgiving to patch, because fresh lime knits into old lime and can be burnished back. Acrylic patches well too, though blending can take more care.
Ageing. Lime matures and can gain character with time. Acrylic tends to stay much as it was on the day it was finished.
Safety while working. Wet lime is caustic, so it is handled with gloves and eye protection. That is our job on site, but it is worth knowing if you are planning any DIY repairs.
Whether you are in a London mansion block, a Birmingham villa, a Manchester warehouse flat or a farmhouse anywhere in the UK, our own artisans can survey the walls and advise. We have a London showroom and training centre you can visit by appointment, and courses run at our Zavoré Academy in Birmingham and our London and Manchester centres. Plaster materials are also sold in our shop for decorators who already know the craft.
More about the practical side is on our Venetian plaster installation page.
Lime is the traditional binder, used in Italy for centuries, so it carries that history. Authentic is less useful than suitable, though. A lime finish on a modern plasterboard wall and an acrylic finish on a new office corridor can both be the right choice for their setting.
It can be applied, but we rarely suggest it on solid masonry. A film can hold moisture in an old wall and cause problems later. On period properties we usually recommend a lime based system, and we explain why at the survey.
Both last a long time when the wall underneath is sound and the finish is looked after. Lime hardens over time and is easy to repair. Acrylic resists knocks a little better. Lifespan depends far more on preparation and use than on the binder.
Our 48 house colours and any NCS reference can be matched, and you approve a sample before work begins. Some very strong shades behave differently in each binder, which the sample will show.
If you are weighing up lime or acrylic for a room in your home or business, call +44 7592 929191 or email sales@zavore.co.uk with photos, rough measurements and the address, and we will talk it through. Our sample board is a good place to start on colour.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.