


Short answer. Limewash and lime based paints should be cleaned gently, with a soft brush or a barely damp cloth, never scrubbed. Most marks can be fixed by brushing a thin fresh coat of the same colour over the area, which usually blends in well because lime finishes are naturally uneven. Keep some of the original paint aside for this.
Limewash is not a plastic film like most modern paints. It is a thin mineral layer bonded into the wall. That is what makes it breathable and gives it its soft look. It also means it can rub off slightly, especially in the early weeks, and harsh cleaning can wear it away.
Limewash paints vary. Some lime based products behave much like true limewash. Others with an acrylic binder are more wipeable. Check your product's care guidance.

In busy places such as hallways, stair walls and beside doors, marks build up faster. These areas may need a quick touch up once or twice a year, which takes only a few minutes with a brush and a little paint. Many people find this easier than trying to keep a washable paint looking new.
Lime goes darker when wet, so a damp patch will look darker until it dries.
For scuffs, fingerprints or a chip, a touch up is often easier than cleaning. Stir the paint well. Damp the area if you are using true limewash. Brush on a thin coat, feathering it out past the mark into the area around it. Use loose, crossing strokes rather than a neat square, so there are no hard edges.
Because limewash is meant to vary in tone, a touch up usually disappears once dry. If it stands out, a second thin coat over a wider area tends to blend it.
If a wall has many marks, has faded unevenly or has been patched, a fresh coat over the whole wall can be quicker than spot repairs. Brush off dust first. There is no need to strip limewash before adding more.
If you see flaking, powdering or patches, the cause may be the surface or how it was applied. Our guide to limewash problems and fixes explains what to look for.
When the job is finished, keep a small sealed tub of the same colour, a brush and a label with the room and date. Store it away from frost. Ordering all your paint at once, such as Zavoré's Lime Paint, means your spare matches the wall.
To check a colour before you buy more, order a sample board. You can call 07592 929191 or email sales@zavore.co.uk for advice, or read about our limewash installation.
Only gently, with a cloth that is barely damp. Scrubbing can wear the finish away.
Lime looks darker while wet. Wait until it is fully dry before judging it.
No. Emulsion will look different and lime will not bond well over it later. Use the same lime product.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.