ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Polished Plaster in En Suites, Dry Walls and Splash Zones
14 November 2026

Polished Plaster in En Suites, Dry Walls and Splash Zones

A modern bathroom with a walk in shower and smooth walls, showing where polished plaster in en suites meets the wet zone

Polished plaster in en suites works well on the dry walls of the room and in light splash zones around a basin or behind a freestanding bath, provided it is sealed and wiped down. It is not the right finish inside a shower enclosure. Zavoré installs polished plaster with our own artisans, and in the wet zone we use tadelakt or microcement on a properly waterproofed wall, so the room still reads as one calm surface.

Our main page on polished plaster covers the finish in general, from colour to sheen. We install it in en suites and bathrooms across the country, and you can find every area on Venetian plastering across the UK.

  • Dry walls in an en suite are ideal territory for polished plaster.
  • Splash zones near a basin or bath can take it once sealed with wax.
  • Inside the shower, choose tadelakt or microcement over a waterproofed wall.
  • The wall behind a shower always needs tanking, whatever the finish.
  • Plasterboard needs reinforced joints and the right primer first.

Can you use polished plaster in en suites at all?

Yes, and many people do. An en suite is often small, lit by one window or a ceiling light, and the gentle sheen of polished plaster makes it feel larger and softer. The trick is to divide the room honestly into three zones before choosing anything.

  1. Dry walls. The wall behind the door, the wall with the towel rail, the area above a vanity unit. These see steam but no direct water.
  2. Splash zones. The strip behind a basin, the wall beside a bath, the area near a toilet. These get the odd splash that can be wiped away.
  3. Wet zones. Anything inside the shower enclosure, or a wet room floor. These are hit by running water every day.

Polished plaster belongs in the first zone and, with care, in the second. It does not belong in the third.

Dry walls and splash zones in an en suite

On dry walls we lay the plaster in thin coats, burnish it and protect it with wax. In a splash zone the same finish is used, but we pay closer attention to sealing and to the junctions with the basin, worktop or bath. The surface is meant to be wiped dry after a splash, not left with standing water on it. Good extraction helps every finish in a bathroom, so make sure the fan works and the room can air.

Lime based polished plaster breathes, which suits older solid walls in Victorian terraces and Edwardian semis. An acrylic version forms a film and can be a sensible choice on a new plasterboard wall. Either way, the wall has to be flat, because a polished surface shows every dip.

What goes inside the shower in a polished plaster en suite?

Inside the enclosure we move to a finish made for water. Tadelakt is a traditional lime finish, compacted and polished with soap. Microcement is a thin cement based coating that we install and seal so it can be washed. Both go onto a wall that has already been waterproofed, and the sealer on microcement makes the surface washable, while the wall behind the shower still needs tanking in its own right.

The colours can be matched, so the shower and the dry walls sit together. Many people choose a warm stone in polished plaster outside the shower and a close tone in tadelakt inside, so the change of finish is almost invisible.

Preparing en suite walls for polished plaster

Preparation decides how the finished wall looks. At the survey we check the following.

  • Whether the walls are plasterboard, old lime plaster or modern skim.
  • Flatness, because the sheen exaggerates any hollow.
  • Cracks, damp and movement, especially around old pipework.
  • Where the tanking runs and how it meets the dry walls.
  • Extraction, access and how floors and sanitaryware will be protected.

On plasterboard the joints need reinforcing and the right primer. If a wall needs skimming or a damp issue fixing first, we say so plainly before we give a price.

How the installation is planned

We start from your photos, drawings and rough measurements, then survey the room. You approve a sample of the colour and sheen, and only then do we agree dates. The work is planned in blocks of days so the same artisans stay on the job and lay every coat in order. We do not give installation prices or timescales in weeks before the survey, because an en suite with new boards and a room with old lime walls are very different jobs. More detail is on our Venetian plaster installation page.

In flats, many leases need the freeholder's permission before works, so check yours. If the building is listed, listed building consent is generally needed for works that affect its character; check with your local planning authority.

Polished plaster en suite installers near me

Our artisans install in London, Birmingham, Manchester and right across the UK, in mansion block flats, new build apartments, country houses and family homes alike. Zavoré was established in 2021 and teaches the craft at the Academy in Birmingham and at our London and Manchester centres. If you have a decorator who wants to lay it, the plaster and wax are sold in our shop.

Questions about polished plaster in en suites

Will steam damage polished plaster in an en suite?

On dry walls with working extraction, everyday steam is not a problem once the plaster is sealed. What it does not like is running water or water left standing on the surface. That is why the shower enclosure gets tadelakt or microcement instead.

Can polished plaster go behind a basin?

Yes, as a splash zone. We seal it with wax and take care at the junction with the basin or worktop. Splashes should be wiped dry rather than left. For a very busy family bathroom, some people prefer microcement or tadelakt there too.

Can I match the shower finish to the polished plaster?

Usually yes. We work from the same colour reference, either one of our 48 house colours or an NCS code, and show both finishes on samples so you can judge them side by side before anything is laid.

Is polished plaster harder to clean than tiles?

It has no grout lines, so there is less to scrub. A soft damp cloth is usually enough on dry walls. Avoid harsh abrasive cleaners, which can dull the wax. We explain aftercare when the work is finished.

To plan an en suite, call +44 7592 929191 or email sales@zavore.co.uk with photos of the room, a rough sketch with measurements and the address. You can also order a sample board to try colours against your tiles and fittings.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
AR