


Venetian plaster sheen levels run from a soft, chalky matt through a gentle satin to a deep, mirror like polish, and the difference comes from how the lime is laid, compressed and finished rather than from a different product. Zavoré installs every sheen level with our own artisans in homes across London, Birmingham, Manchester and the UK, and we make a sample at the sheen you choose so you can see it before any wall is plastered.
For an overview of the material, see our Venetian plaster page. Wherever you live, our page on Venetian plastering across the UK shows the cities and regions we install in.
Venetian plaster is a lime based material laid in very thin coats with a steel trowel. As each coat starts to firm up, the artisan presses and works it. That compression closes and tightens the surface, and the more it is worked, the smoother and more reflective it becomes. A final burnish brings up the shine, and a wax can deepen colour and add a soft gloss with some protection.
So sheen is a matter of craft and timing. The same plaster can be left open and soft or polished hard until it gleams. That is why polished plaster is not a separate product but the polished end of Venetian plaster.
Matt. A soft, mineral surface with little reflection. Marmorino and limewash often sit here. It feels calm and natural and suits period rooms, bedrooms and stone cottages.
Low sheen or eggshell. A gentle lift of light as you move past the wall, still restrained. Good for living rooms and dining rooms where you want depth without glare.
Satin. A clear, silky sheen with visible movement in the surface. This is where many people land, because it shows the layered depth of Venetian plaster while staying easy to live with.
High polish. Bright, glassy and strongly reflective. Often what people picture when they say polished plaster. It suits hallways, cloakrooms, feature walls and commercial reception areas.
Mirror polish. The far end of the range, worked and burnished until the wall reflects shapes and lights. It is dramatic, and it demands a perfectly flat wall.
Think about the light too. A north facing room with soft daylight can carry more sheen without glare. A wall opposite a large south facing window may look better a step lower. Downlights close to a wall will pick out every ripple in a high polish.
The higher the sheen, the more honest the wall. A polished surface reflects light like a still pond, so any hollow, bump or ridge shows up as a ripple. That is why a mirror polish needs the flattest preparation, and why we check flatness carefully at the survey. On an uneven period wall we may suggest a lower sheen, or skimming first.
Plasterboard needs its joints reinforced and the right primer, or a line can telegraph through a polished finish. Solid masonry suits lime because it breathes, whereas acrylic products form a film. Other problems include patchy sheen from uneven burnishing, or a dull area where wax was missed, which is why the same artisans carry a wall through from first coat to final polish.
Our Venetian plaster installation page sets out the process in full.
Photographs rarely show sheen accurately, because cameras and screens flatten reflection. If you can, see real samples. Our London showroom and training centre can be visited by appointment, and we also have training centres in Birmingham and Manchester. Otherwise, a sample board posted to your home lets you watch the finish change through the day.
A well compressed, waxed surface is closed and easier to wipe, so polished finishes tend to shrug off fingerprints better than very matt ones. That said, any lime finish can be marked by a hard knock, and both can usually be repaired locally.
Raising sheen is sometimes possible with further burnishing or wax, depending on the finish. Lowering it is harder. That is why we agree the sheen on a sample first, so the finished wall matches what you expect.
Yes. The same pigment usually reads deeper and richer at higher sheen, and softer and lighter when matt. Always approve colour at the sheen you plan to use.
Matt or low sheen finishes, such as marmorino or limewash, are kinder to gentle undulations and suit period character. If you want a high polish, the walls usually need flattening first.
To talk about sheen and colour, call +44 7592 929191 or email photos and rough measurements to sales@zavore.co.uk. Order a sample board to compare finishes at home.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.