


Venetian plaster for spas and beauty salons gives receptions, treatment rooms and relaxation lounges a seamless, softly lit surface that feels calm the moment a guest walks in. Zavoré installs it in commercial interiors across the UK with our own artisans. It belongs on dry walls; inside showers, steam areas and wet treatment rooms we turn to tadelakt or microcement on waterproofed walls, matched in colour so the whole space reads as one.
For the background on the material, finishes and colours, see our guide to Venetian plaster. We work in towns and cities nationwide, set out on Venetian plastering across the UK.
A spa sells a feeling before it sells a treatment. Walls do a lot of that work. Venetian plaster gives depth without pattern, a quiet sheen that picks up candle light or a low wall washer, and a surface that feels smooth and cool to the touch. Because it is laid by hand in thin coats, there are no seams, no repeats and no tiles to break the eye, so even a narrow corridor looks considered.
The finish can be pale and airy, in warm whites and soft stones, or rich and enveloping, in clay, taupe or deep green. Polished plaster gives a marble look, though it is not marble; marmorino is softer and more matt; travertino recalls stone; limewash brings a chalky, moving colour.
Showers, steam areas, wet treatment rooms and the walls around a hydrotherapy bath see far more water than Venetian plaster is designed for. In those places we install tadelakt, a polished lime finish worked with soap, or microcement, a thin cement based coating that we seal so it can be washed. Both go over walls that have already been waterproofed, and the wall behind a shower still needs proper tanking. Rooms like saunas and steam rooms have their own demands, so we talk through the building, the ventilation and how the room is used at the survey before recommending anything.
Salons and spas clean constantly. A waxed Venetian plaster wall wipes down with a soft damp cloth and mild cleaner. Strong solvents and abrasive pads can dull the surface, so it is worth agreeing a cleaning routine with your team. Near basins and colour stations, think of the wall as a splash zone, wiped promptly, or choose microcement or tadelakt for that section.
We start with photos, drawings and approximate measurements. A survey follows, covering the background, flatness, cracking, damp, movement, how each room is used, and access and protection of floors and fittings. Only then do we price. You approve a sample of colour and sheen, and dates are agreed, with the work planned in blocks of days so the same artisans stay on site. Commercial jobs are timed around trading, often room by room. Our Venetian plaster installation page covers what we lay.
Most salons and spas lease their premises, and many leases need the freeholder's or landlord's permission before decorative work, so check yours. In a listed building, consent is generally needed for works affecting its character; your local planning authority can advise.
Our artisans install in London, Birmingham, Manchester and right across the UK, from city centre units to country house spas. Zavoré was established in 2021, and the London showroom and training centre can be visited by appointment. If you have a fit out team with their own applicators, the plaster is sold in our shop, and the craft is taught at the Academy in Birmingham and our London and Manchester centres.
No. It is meant for dry walls. In showers we use tadelakt or microcement over a waterproofed wall, with tanking behind. Steam rooms and saunas are specialist spaces, so we discuss them in detail at the survey rather than give a general answer.
Yes. We can work from any NCS reference or choose from our 48 house colours. You approve a physical sample before anything is laid, which matters because plaster reads differently from a printed swatch or a screen.
Not necessarily. We plan commercial work in blocks of days and can often move room by room so part of the business keeps trading. The programme is agreed after the survey, once we know the extent of the walls.
It depends on wall area, preparation, the finish and colour, access and timing. We do not give a figure before the survey. Afterwards you receive a clear written price, and the sample is approved before any booking is confirmed.
Planning a new spa or refreshing a salon? Call +44 7592 929191 or email sales@zavore.co.uk with photos, plans and rough measurements of the rooms. Order a sample board to try finishes against your fittings.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.