ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/How a Bas Relief Wall Is Made, From Sketch to Final Coat
14 November 2026

How a Bas Relief Wall Is Made, From Sketch to Final Coat

Hands using two trowels to apply plaster to a wall, the hand work behind how a bas relief wall is made

A bas relief wall is made by hand, on site, in a fixed order. First comes a brief, then a drawing to the scale of the wall, a survey before any price, a sample of the finish, preparation of the surface, building the plaster up in layers, carving it while workable, refining every edge and, last of all, the final coat. Zavoré follows this sequence for every sculpted wall it makes in homes and commercial interiors across the UK.

Our bas relief installation page sums up the stages, and the main bas relief page shows what relief can look like, from a single stem to a whole landscape. Our own artisans carry out the work wherever you are, in the same way as our Venetian plastering across the UK.

  • Nothing is sculpted until you have approved a scale drawing of the design.
  • The wall is surveyed before any price is given, because the background decides the preparation.
  • The relief is built up in plaster in stages and carved by hand, never cast or fixed on as a panel.
  • Lighting has to be designed in at the start so its channels can be sculpted into the piece.
  • The finish, from natural white to Venetian plaster or gilding, is agreed on a sample first.

Step one, the brief for a bas relief wall

Every sculpted plaster wall begins with a conversation. Send a photo of the wall, its rough height and width, and anything that inspires you. That might be a sketch on paper, a tree in your garden, a pattern from a rug, a city skyline or a company logo. Tell us how the room is used, where the light comes from and whether you picture the relief staying white or taking colour. The more we understand at this point, the closer the first drawing will be.

Step two, how is a bas relief design drawn?

We draw the piece to the scale of your wall so you can see exactly how high it climbs, how wide it spreads and how it meets doors, windows, sockets and skirting. This is where proportions are settled. A branch that looks right on a small sketch can feel cramped once it is drawn against a real wall, so expect a little back and forth. If you want lighting built into the relief, the positions of LED strips behind ledges, arches or branches are marked on the drawing now, because the recesses for them are sculpted in from the start.

Step three, the survey before any price

A carved piece is only as good as the wall behind it, so we survey before giving a price. We look at what the wall is made of, how flat and sound it is, any cracks, movement or damp, and how we will get materials and protection into the room. Plasterboard joints need reinforcing and the right primer, and loose or hollow areas are cut back and made good. The price follows the survey and the agreed drawing, since both the design and the preparation shape the work involved.

If the property is listed, listed building consent is generally needed for works that affect its character, so check with your local planning authority. In a flat, many leases need the freeholder's permission, so check yours before dates are booked.

Step four, approving a sample of the finish

Before work starts you approve a sample of the finish. A relief can stay natural white, be tinted, painted in full colour, or finished in Venetian plaster, limewash or metallic detail. Colours come from 48 house colours or any NCS reference, and the materials are tinted to match the approved sample. Our sample board is worth viewing in the room, in the morning and again in the evening, before you decide.

How is a bas relief wall built up and sculpted?

Once dates are agreed, the room is cleared and protected and the wall is primed for the new plaster. The design is transferred from the drawing onto the wall, then the relief is built up in layers by hand, thicker where the design stands proudest and thinner where it fades back towards the background. Because bas relief is low relief, the depth stays modest, but the layering is what gives it a convincing sense of distance.

While each layer is still workable, it is carved. Leaves are separated, ridges are cut, the edges of rooftops or letters are defined, and soft transitions are blended into the flat surface around them. Work is planned in blocks of days so the same artisans stay with the piece, carving, letting it firm up, then returning to refine. Refining takes patience, since every edge has to be clean and every curve has to read correctly under low angled light.

Finishing and sealing, the final coat

When the carving is complete and the plaster has firmed, the finish goes on. A white relief may simply be brought to a clean, even surface. A painted relief is coloured in stages so the shading follows the form. A Venetian plaster or limewash finish is laid so it wraps the raised areas and the background as one continuous skin. Metallic detail or gilding is added along edges where the light will catch it. Where the chosen finish calls for protection, a suitable sealer or wax is applied last, and any built in lighting is connected by a qualified electrician at the end.

What can go wrong, and how is it avoided?

  • A weak background. Cracks or loose plaster behind the relief would show through later, which is why the survey and preparation come first.
  • Proportions that feel wrong. The scale drawing exists so these are caught on paper, not on the wall.
  • Lighting added as an afterthought. Channels cut into a finished relief never look as tidy as ones sculpted in from the beginning.
  • Rushing the layers. Plaster needs time to firm between stages, and blocks of days give it that time.

Questions about how a bas relief wall is made

How long does it take to make a bas relief wall?

It depends on the size of the wall, the detail of the design and the finish, so there is no standard timescale. Once the survey and drawing are done, we plan the work in blocks of days and agree the dates with you before anything starts.

Can I change the design once sculpting has started?

Small refinements are sometimes possible while the plaster is still workable, but the drawing stage is the right time for real changes. That is why we draw to scale and ask you to approve it before any plaster goes on.

Is a bas relief cast in a mould?

No. It is built up and carved by hand on your wall, so no two pieces are the same. Repeating designs made as a set are sculptural plaster panels, which are a different product that we also offer.

Do I need to move out while the work is done?

Usually not, though the room itself needs clearing and protecting because there is wet work and some dust. We talk through access, the rest of the house and how the room is used at the survey.

To start a sculpted wall, call +44 7592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos of the wall, rough measurements, the address and any images that inspire you. We will talk through the design with you and arrange the survey.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
AR