


Yes, microcement makes an excellent seamless bathroom in Abu Dhabi villas and apartments, provided the base is rigid and dry and the shower area is properly tanked first. Zavoré installs microcement across Abu Dhabi, Al Ain and the wider UAE with our own artisans, laying floors, walls, shower enclosures and vanity tops as one continuous surface with no grout lines to clean.
Our microcement installation page sets out how each job is prepared, laid and sealed, and Venetian plastering in Abu Dhabi covers the lime finishes that often sit on the walls just beyond the bathroom door. For the seamless finish in the capital, see microcement in Abu Dhabi.
Much of the housing in the capital is recent. Towers on Al Reem Island and Al Raha Beach, and newer villas on Yas Island, Saadiyat Island and in Khalifa City, tend to have level concrete slabs, large format openings and clean modern lines. A bathroom finished in one material, running from the floor into a walk in shower and up the walls, suits that architecture well. Without grout lines a small ensuite looks larger, and a generous master bathroom feels calm rather than busy.
The material is cement, fine aggregate, polymer and pigment, trowelled on in thin layers over a primed and reinforced base. Because it is applied rather than laid in pieces, it can wrap around a bench, a niche or a shower kerb without a joint. Colour runs from soft whites and warm greys to sand and deeper stone tones, chosen from samples in the room so the shade sits well with the tapware, the vanity and the light from any window.
The sealer is what makes microcement washable and resistant to water, not the cement itself. In a shower, the wall and floor behind the finish still need proper tanking, exactly as they would under tile. That waterproofing layer has to be continuous into the drain and around the tray or the falls of a level access floor, with corners and pipe penetrations treated carefully.
We talk through what the shower needs at the survey, before the price is fixed. If the bathroom is being stripped back as part of a wider renovation, it helps for the plumber and the tiling or waterproofing contractor to know early that the final surface will be microcement, so the falls, the drain position and the tanking are planned for it.
Often it can. Tiles that are firmly stuck can be degreased and keyed, the grout lines filled and the whole surface reinforced with mesh before the first layer goes on. Hollow or drummy tiles have to come up, because anything loose underneath will eventually show through as a crack. A screed that is still green, a timber floor that flexes or a wall that moves will also come through, so these are the things we look for first.
Covering tiles saves the mess of stripping a room, but it is not always the right answer. If the tanking behind an old shower is doubtful, it is wiser to remove the tiles, sort the waterproofing and start again. We say plainly which route suits your bathroom.
Your tower or community will almost certainly have management rules about when noisy work can happen and when deliveries may arrive, so find out before dates are set. Tenants should get the landlord’s agreement first. The bathroom will be out of use while the layers are laid and the sealer cures, so if it is the only one in the apartment, plan around that. Preparation usually takes longer than the finish, and it is where a good bathroom is won or lost.
Venetian plaster is not for inside a shower. It is a beautiful choice for the dry walls of a bathroom, a powder room or the corridor outside, but the walls that take water need something else. One answer is microcement laid over a waterproofed wall, and tadelakt, the polished lime finish from Morocco, is the older one. Tadelakt has a soft, hand rubbed sheen that suits a home hammam or a deep shower recess, while microcement gives a flatter, more architectural look that runs easily across floors as well as walls.
Many bathrooms use more than one finish. A microcement floor and shower can sit beside a marmorino or polished plaster wall above a vanity, provided the plaster stays out of the splash zone. Which mix suits your room is something we settle on site, once we have seen the walls, the ventilation and how the bathroom is used.
Yes, and that is one of its main attractions. The same colour can run across the floor, into the shower and up the walls, with the corners formed in the material itself. The base for each surface is prepared separately, but the finished room reads as one.
A smooth sealed surface can feel slick underfoot when water is on it. We talk through texture, the sealer and where the floor gets wet at the survey, so the shower and the main floor suit the way the bathroom is used by your household.
Use warm water and a mild, pH neutral cleaner with a soft cloth or mop. Avoid scouring pads, bleach and strong descalers, which can wear the sealer. Wiping the shower down after use keeps limescale and soap from building up on the surface.
It cracks when what lies underneath moves. On a rigid, dry and primed base, with structural joints carried through the finish, it stays sound. That is why we spend longer getting the base right than laying the final coats.
To talk about your bathroom, ring +44 7592 929191 (Monday to Saturday, 9am to 6pm UK time) or email sales@zavore.co.uk with photos, rough measurements and the address of the villa or apartment.
Leeds has many Victorian terraces and villas with solid walls and original mouldings. This guide covers lime plaster repairs and coving r...
LimewashHow brush technique, thin coats and drying create the cloudy look of limewash, and how to ask Zavoré about limewash training.
Buying GuideThe Zavoré plaster range grouped by the look and job each one does, to help you shortlist finishes before ordering samples.
BirminghamA practical checklist for students before a Zavoré Academy course. Clothes, reading, questions to bring and what is already supplied at t...
ManchesterA guide to Venetian plastering in Manchester offices, receptions and commercial spaces, from finish choice and brand colours to planning ...
LimewashAn outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.