ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/What Is Polished Plaster, Finishes, Uses and How It Is Made
14 November 2026

What Is Polished Plaster, Finishes, Uses and How It Is Made

A close view of a dark textured plaster wall, showing the depth and movement of a polished plaster finish

Polished plaster is a decorative wall finish made from lime and finely ground marble, laid by hand in very thin coats and then burnished until it takes on a soft or glassy sheen. It gives walls the depth and cool movement of stone without slabs or joints. In the UK the term usually describes the glossy end of the Venetian plaster family. Zavoré installs, supplies and teaches polished plaster, and our own artisans lay it across London and the UK.

You can see the full range on our polished plaster page, and Venetian plastering across the UK shows where we install it. This guide explains the material, the main types and how a polished wall is made.

  • Polished plaster is lime putty and marble dust, tinted and pressed onto the wall with a steel trowel.
  • It is the high sheen end of Venetian plaster, with marmorino and travertino at the quieter end.
  • Lime based versions breathe, while acrylic versions form a film.
  • Walls must be flat and sound, because a polished surface shows every dip.
  • It suits dry interior walls, not the inside of a shower.

What is polished plaster made of?

Traditional polished plaster starts with slaked lime, aged as a putty, mixed with marble ground to different grades of fineness. Coarser grades build the early coats, and the finest grades go on last so the surface can close and shine. Colour is added as pigment, so the tint runs through the material rather than sitting on top like paint.

As lime cures it slowly draws carbon dioxide from the air and hardens back towards limestone. That is part of why a lime finish feels so close to stone. It also means the wall remains breathable, which matters on old solid masonry. Some modern products use an acrylic binder instead, which is more flexible but forms a film over the wall.

How is polished plaster different from Venetian plaster?

The names overlap, and people use them loosely. Venetian plaster, or stucco veneziano, is the broad family of lime and marble finishes that grew from Italian craft. Polished plaster is the English trade term, and in practice it most often describes the smoothest, most reflective finishes in that family, where the surface is burnished to a high sheen and often waxed.

Within the same family sit quieter finishes. Marmorino has a finer, more matt grain with a gentle sheen, and travertino imitates the layered, pitted look of travertine stone. Tadelakt is a related lime finish from Morocco, polished with a stone and sealed with soap for wet areas. Our page on the classic Venetian plaster installation covers how these are laid.

What types of polished plaster finish are there?

  • High polish. Glassy and reflective, with deep cloudy movement, often finished with wax.
  • Soft polish. A satin sheen that catches light gently, easier to live with in bedrooms and living rooms.
  • Marmorino. Fine grained and calm, ranging from matt to a quiet lustre.
  • Travertino. A layered stone look with natural voids, polished or left more open.
  • Metallic. A version with a metallic sheen for feature walls.

Any of these can be tinted to one of 48 house colours or matched to an NCS reference.

How is polished plaster made on the wall?

  1. The wall is prepared. It must be flat and sound, plasterboard joints need reinforcing, and the right primer goes on.
  2. A first thin coat is pressed on with a flexible steel trowel and left to firm.
  3. Further thin coats follow, each worked in a slightly different direction to build depth.
  4. The last coat is burnished, compressing the surface until it shines.
  5. Wax can be buffed in by hand for extra lustre and a wipeable surface.

Every coat has to be laid in order, at the right moment, which is why our jobs are planned in blocks of days so the same artisans stay on the job from start to finish.

Where is polished plaster used?

Polished plaster works on almost any dry interior wall. Feature walls in living rooms, halls and stairwells, dining rooms, bedroom walls behind the bed and powder rooms are the classic choices. In commercial spaces it appears in hotel lobbies, reception areas and boutiques. A fireplace wall is another favourite, because the warm light of a fire moves across the burnished surface.

It is not for inside showers. Tadelakt or microcement on a waterproofed wall is the right finish there. Polished plaster also dislikes walls that move or flex, which is why preparation matters so much.

Is polished plaster the same as marble?

No. Polished plaster gives a marble look, but it is not marble. It contains marble dust, so it has a cool, stony feel, but it is laid as a seamless coat a few layers thick rather than cut and fixed in slabs. That makes it far lighter, free of joints and easy to run around curves and corners.

Questions about polished plaster

Is polished plaster hard wearing?

A properly laid lime polished plaster cures hard and, once waxed, can be wiped clean. Like any wall finish it can be marked by heavy knocks, but small areas can often be repaired locally by a skilled hand without redoing the whole wall.

Can polished plaster go on plasterboard?

Yes, provided the joints are reinforced, the boards are firmly fixed and the right primer is used. Polished finishes show every dip, so the board must be flat. Sometimes a skim coat goes on first.

Can I learn to apply polished plaster?

Yes. We teach in person at the Zavoré Academy in Birmingham and at our London and Manchester centres. The Beginner Course is 3 days, the Advanced Course 4 days and 1 to 1 Training 3 days, with all materials included.

Where can I see polished plaster before I choose?

You can visit our London showroom and training centre by appointment, or order the sample board and view it in the room, morning and evening, before deciding.

To talk about polished plaster for your home or business, call +44 7592 929191, Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos, rough measurements and the address. If you have your own decorator, plaster materials are available in our shop.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
AR