ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Bas Relief for Office Receptions and Brand Walls
14 November 2026

Bas Relief for Office Receptions and Brand Walls

A decorative bas relief with cherubs and ornament, showing the carved depth that bas relief can bring to office receptions and brand walls

Bas relief for office receptions and brand walls means a logo, lettering, pattern or scene carved by hand into the plaster of the wall, standing a few millimetres or centimetres proud and catching the light. Zavoré designs and sculpts bas relief on site with our own artisans for offices in London, Birmingham, Manchester and across the UK. You see a scaled drawing of every piece, and sign it off, before a single layer of plaster is applied.

To understand the craft, read our page on bas relief walls, and for how a commission runs on site see bas relief installation. You can also browse the areas we reach under Venetian plastering across the UK.

  • Every relief is shaped by hand in place, never cast in a mould or screwed on as a panel.
  • Logos, lettering, geometric patterns and landscapes can all be carved in low relief.
  • You can keep it natural white, add colour, or surround it with Venetian plaster or a metallic touch.
  • Hidden LED lighting can be planned into the design from the start.
  • Every commission starts with a scaled drawing for approval.

Why bas relief works for office receptions

A reception is where visitors form their first impression of a business. A sculpted wall reads as permanent and considered, something that belongs to the building rather than being hung on it. Because the carving is shallow, it does not crowd a reception area or interfere with circulation. Low angled light passing across the relief creates shadows that shift through the day, so the wall stays interesting to staff who walk past it every morning.

Bas relief brand walls, logos and lettering

Many businesses want their identity in the reception without a printed sign. A logo or name in bas relief does that quietly. We start from your brand files and draw the design to scale, considering how high it should sit, how deep the relief should be and how it relates to desks, doors and seating. Lettering can be crisp and modern or softly rounded. Abstract patterns drawn from a brand shape can run across a whole wall, while a single emblem can sit centrally behind the desk.

  • Logo walls behind reception desks, sculpted in white or tinted to brand colours.
  • Lettering for a company name or motto, with clean edges carved by hand.
  • Geometric patterns of lines, arches or waves inspired by the brand.
  • Landscapes or cityscapes that tell a story about where the business comes from.

How a bas relief reception wall is made

  1. The brief. You send photos of the wall, its size, brand files and any references.
  2. The drawing. A scaled sketch shows the height, spread and depth so you can sign it off.
  3. The survey. We check the substrate, access, lighting and any building requirements.
  4. Carving in place. Plaster goes on in stages and is shaped while still soft, then sharpened and smoothed.
  5. Colour and surface. Natural white, brand colours, a limewash wash, a polished surround or gilded edges.

We book the carving as consecutive days on site, which keeps one team of artisans with the piece until it is done.

Lighting and finishes for office bas relief

Light is what brings relief to life. Concealed LED strips can sit behind letters, ledges or arches so the wall glows after dark. We decide this while drawing, so recesses for the strips are carved in from day one, and a qualified electrician handles the wiring. For finishes, plain white keeps attention on the shadows, while a background in polished Venetian plaster or marmorino gives a richer surround. Metallic detail on letter edges can echo brand colours.

How much does a bas relief office wall cost

Price follows the area covered, the amount of detail, how deep the carving goes, whether lighting is included and the chosen surface. A single logo behind a desk is very different from a full wall of sculpted pattern. Send photos, measurements and your brand files, and we will give a clear quote once we have seen the design you want.

Practical points for offices and shared buildings

Offices in shared buildings often have rules about working hours, deliveries and noise, so check with your building management early. Sculpting is quieter than many fit out trades, but preparation can create dust, which we contain with screens and protection. If you lease your office, many leases need the landlord's permission for alterations, so check yours. We can work around opening times to keep your reception usable.

Bas relief near me for offices in London, Birmingham and Manchester

Zavoré was established in 2021 and creates bas relief and every decorative finish with our own artisans in London, Surrey, Birmingham, Manchester and across the UK. Our London showroom and training centre can be visited by appointment, which helps design teams see finishes before presenting to a client.

Questions about bas relief for office receptions

Can you sculpt our company logo?

Yes. We work from your brand files and produce a scaled drawing so you can agree its size and placement. Our artisans then carve it in place and finish it in white, a tint, paint or metallic detail.

Is bas relief the same as sculptural panels?

No. Sculptural plaster panels are a set design repeated across a wall. A relief is a single bespoke carving for one wall, so nothing repeats. We offer both and will say which suits your reception and budget.

How do we keep a relief wall clean?

A soft brush or dry cloth removes dust from ledges and edges. Avoid wet scrubbing on unsealed areas. Sealed or painted finishes can take gentle wiping. If a corner gets knocked, small areas can usually be repaired and refinished on site.

Can a relief be added to a plasterboard wall?

Often yes, once the boards are secure and the joints reinforced. We check the wall at the survey and confirm whether it can carry the depth of relief you want, or whether a base needs building out first.

To plan a bas relief for your office reception or brand wall, email photos, measurements and your brand files to sales@zavore.co.uk, or phone +44 7592 929191 between 9am and 6pm, Monday to Saturday. We will come back with ideas for the design and the next steps.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
AR