


Clay plaster and lime plaster are both breathable, natural, mineral wall finishes, and they behave very differently. Clay never sets chemically: it dries, and it can be softened with water again. Lime cures, slowly hardening as it takes carbon dioxide back out of the air, and once cured it stays hard. That one difference drives everything else, hardness, water tolerance, repairability, colour and which rooms each belongs in. This is how we choose between them. For the finish itself, see our clay plaster and roman clay page.
If you want it installed, our own applicators handle clay plaster installation from survey to final coat.
Clay plaster is clay, sand and usually a fibre such as chopped straw or cellulose. The clay particles hold the mix together by attraction, not by a chemical reaction. Add water and they let go again. That makes clay endlessly reworkable and endlessly repairable, and it also makes it the softer of the two.
Lime plaster is slaked lime with an aggregate, marble dust for the fine polished finishes, sand for the coarser ones. It sets by carbonation: the lime slowly turns back into a form of limestone. It is touch dry in hours and keeps hardening for weeks afterwards. Once that has happened, water will not undo it.
Both are vapour open, which is why both suit solid walled period buildings where moisture has to move through the wall rather than be trapped behind it. Neither of them likes being sealed in with vinyl emulsion.
Lime plaster starts and ends as limestone. Lime is made by heating limestone, which drives off carbon dioxide and leaves quicklime. Adding water slakes the quicklime into the lime putty that plasterers use. Once it is on the wall, the lime takes carbon dioxide back from the air and slowly turns back into a form of limestone. So a cured lime plaster wall is, chemically, close to the stone it came from.
The fine lime finishes, such as Marmorino and polished plaster, pair that lime with marble dust. For the wider range of lime and mineral finishes, see our guide to decorative plaster.
| Clay plaster | Lime plaster | |
|---|---|---|
| Binder | Clay, held by particle attraction | Slaked lime, set by carbonation |
| Cure | Dries only; never chemically sets | Hardens over weeks and keeps going |
| Hardness | Soft; marks with a knock | Hard; polished lime is very hard |
| Water tolerance | Poor. Water rewets and damages it | Good once cured; excellent when polished and sealed |
| Breathability | Very high, and it buffers humidity | High |
| Surface | Matt, granular, velvety, no sheen | Matt to mirror, depending on the finish |
| Colour | From the clay and pigments; warm, earthy, matt | Tinted; holds cool and deep shades well |
| Repair | Damp the patch and rework it; blends in | Patching is skilled work and can show |
| Caustic when wet | No | Yes, wear gloves and eye protection |
Clay is matt in a way no paint achieves. The surface is slightly granular, it swallows light rather than reflecting it, and the colour reads as depth rather than as a coating. Because the pigment is the earth itself, the palette leans warm: ochres, umbers, pinks, soft greys, sand and stone. It cannot be burnished, and trying only polishes the sand.
Lime covers a much wider range, because it is the finish that decides the look rather than the binder. The same lime can be left sandy and rustic, floated to a soft stone surface, or compressed to a deep polish that behaves like marble. It takes tint well and holds saturated and cool colours that clay simply will not reach. Our limewash page shows the chalky, cloudy end of the lime range; clay plaster shows what the earth finish looks like next to it.
Our rules of thumb, after laying both:
Every decorative finish gets damaged eventually. Clay is the most forgiving material we know: wet the damaged area, work in fresh material of the same mix, and once it dries the repair disappears, because there is no cure line between old and new. A homeowner can do it.
Lime does not offer that. A cured lime wall is a single carbonated skin, and a patch in the middle of it is a new piece of material that has to be blended by eye and by trowel. On a textured finish it can be made invisible by a good hand. On a high polish it usually means reworking a whole wall between corners. That is the trade off you accept for the hardness. Our notes on maintaining polished plaster cover what day to day care avoids getting there in the first place.
Mix them. They sit together well because they share a mineral, matt to soft language and neither one looks like paint. Clay through the bedrooms in a warm earth tone, lime through the circulation spaces where the wear is, and a polished lime feature wall where the room needs a focus. If you want the two to relate, pull the clay colour and the lime colour from the same family rather than matching them exactly; an exact match across two different surfaces never quite reads as a match anyway.
One thing to decide early: colour is made into these materials, not painted on afterwards. Our lime finishes are tinted to your colour in the tub before they ship, so the shade is settled before anything reaches the wall. Lime Paint is £47 for 14 litres if you want the breathable chalky look across large areas, and a sample board is £8 if you want to see a shade in the real material first. Everything is in the shop.
Neither is better; they fail in different places. Clay is softer, warmer, easier to repair and better at buffering humidity, so it suits bedrooms and living rooms. Lime is harder, tougher and water tolerant once cured, so it suits hallways, kitchens and bathrooms. Most houses are better with both than with one.
Not where water lands. Clay resoftens when wet, so a shower enclosure or a splashback in clay will break down. A large, well ventilated bathroom can carry clay on a dry wall away from the bath, but we would rather specify a lime finish and stop worrying about it.
No, and sealing it defeats the point. The open, porous surface is what lets clay absorb and release moisture and keep a room steady. A sealer closes that off and usually flattens the colour too. If a wall needs to be sealable and wipeable, it needs to be lime rather than clay.
Slightly, and more usefully. Both let vapour pass, but clay also takes moisture into the material and gives it back as the room dries, which smooths out humidity swings. Lime breathes without buffering to the same degree. In an old solid wall either will keep the wall behaving properly.
Where to go next: read the clay plaster and limewash pages to see the two surfaces side by side, then order a sample board in your colour from the shop. If you are working out which finish goes in which room of a whole house, ring us and we will talk it through.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.