


Microcement walls give you one continuous surface with the soft, cloudy look of concrete, but without the weight or thickness. Because it goes on in thin coats, it can cover plasterboard, plaster and sound tiles. This guide covers which walls suit it, how it is prepared and finished, and when a lime plaster might be the better choice.
Microcement shows what is under it, so the wall must be sound, dry and flat.
A wall system usually runs primer, one or two base coats, then finishing coats, then sealer. The trowel marks in the final coats create the movement that makes microcement look like stone or concrete. Smooth, almost flat finishes and more clouded, textured ones both come from how those last coats are laid.
Sealer protects the surface from water, stains and fingerprints. Walls that get touched or splashed need more coats than a decorative wall that is rarely touched. Matt, satin and gloss sealers change the final look, so test on a sample first.
| Microcement | Lime plaster | |
|---|---|---|
| Look | Concrete, industrial | Stone, marble, soft mineral |
| Breathability | Low once sealed | High, suits old solid walls |
| Wet areas | Yes, over waterproofing | Depends on product and sealing |
| Feel | Hard, even | Cool, with depth from layers |
For a concrete look in lime, see Beton Stucco. For solid walls in older houses that need to breathe, a lime finish such as Marmorino is often the safer choice.
Yes, once joints are taped and filled and the board is primed with a primer the system approves.
Not if the wall underneath is stable and joints between materials are reinforced. Most cracks come from movement in the wall behind it. See microcement problems.
You can lay new coats over the old once it is cleaned and primed, but it is a full refinish, not a quick repaint.
Yes. See microcement installation for how we work and the areas we cover.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.