


Lime burnished with a stone and sealed with soap, making a seamless, water resistant skin. Chosen for compact Battersea bathrooms where curves, niches and no grout all help.
Tadelakt in Battersea is for people who want a bathroom that feels carved rather than tiled. It is lime, compressed with a smooth stone and sealed with olive oil soap. Zavoré sells the material and its own artisans install it, and we also teach it. We are based in Birmingham, with a showroom and training centre in London, by appointment only.
Battersea bathrooms tend to be modest in size. A narrow Victorian terrace gives you a first floor bathroom over the kitchen, a converted flat squeezes a shower room into a former box room, and loft conversions add an en suite under a sloping ceiling. Tadelakt copes well with all of these, because it follows curves and angles that tile has to be cut around.
Under a sloped ceiling or around a bath panel, the lack of grout and silicone is a real gain. The surface runs into a niche, over a bench and around a reveal as one skin, which makes a small room look calmer than it is.
The harder question is the structure. Many Victorian bathroom floors are timber, and a wet room needs a rigid, fully tanked base. We assess the joists, boards and falls at the survey and say plainly if the floor needs strengthening. Tadelakt is a finish, and the waterproofing behind it has to be right.
Our tadelakt finishes are for wet and splash areas, and also for rooms that simply suit a soft, mottled surface.
It is the wrong answer for a heavily trafficked floor, or anywhere a sharp edge matters. Strong acid cleaners harm it. For a broader view read tadelakt across London.
The survey covers the substrate, any damp, the planned shower position, movement, access and protection of the rest of the home. Photos can sort out small questions first. The base must be mineral and stable, and plasterboard in a wet area needs tanking and a suitable render built over it.
In Battersea we plan around building management rules, lift and loading bay bookings, permit parking and concierge access, and congestion and ULEZ charges are priced in. Tadelakt cannot be rushed, so the work is booked in blocks of days and our artisans stay to burnish while the lime is at the right point of set.
Expect colour variation, since two panels burnished on different days will not match exactly. A sample board shows the character first. See the tadelakt installation page for more. Flat owners should ask the freeholder or managing agent, and listed or conservation area homes need the council's view.
We will sell tadelakt to you, but it is the hardest finish in the range. The burnishing window is short, and a shower that has not closed properly may only fail later. The shop ships tracked across the UK, and trade accounts exist for professionals.
If you want to learn, the tadelakt course runs at our training centres in Birmingham, London and Manchester, the same at each.
For dry walls in the same house, polished plaster in Battersea and marmorino in Battersea give burnished lime without the soap. limewash in Battersea and clay plaster in Battersea are softer, and travertino in Battersea gives a stone look.
A seamless floor suits microcement in Battersea, and an industrial wall is concrete effect plaster in Battersea. Metallic work is liquid metal in Battersea. We also make sculptural plaster in Battersea, bas relief in Battersea, murals in Battersea, mosaics in Battersea, gilding in Battersea, lacquered walls in Battersea, cornice and coving in Battersea and artificial rock in Battersea.
Behind it all is one decorative finishes specialist in Battersea. Our lime heritage is explained at Venetian plastering in Battersea and Venetian plastering in London.
With correct tanking behind it, yes. The soap and burnish make the surface water repellent, but the structure must be waterproofed properly first.
Not on its own. In a wet area the board needs tanking and a suitable rendered base before any lime goes on. We explain what is needed at the survey.
With mild soap and a soft cloth, wiped dry. Limescale sprays and acids damage it. The surface improves with gentle use and occasional re soaping.
It can. A springy floor will crack a rigid wet room, so joists and falls are checked and strengthened where needed before we begin.
Call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and the postcode. A sample board shows the finish before you commit.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Battersea and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.