


Moroccan lime plaster, burnished with a stone and soaped to repel water, with no grout and no sealer. Made for showers, baths and wet rooms in Coventry homes.
Tadelakt in Coventry is Moroccan lime plaster, burnished with a stone and then soaped, which makes it water resistant without any film or sealer on top. Zavoré supplies and installs tadelakt through our own applicators, and we are based in Birmingham, where our Academy is. It is one of the oldest waterproofing methods still in use, and it suits a bathroom that is tired of grout. A sample board shows the colour and the sheen.
A great many Coventry houses were built for families who worked in the watch, cycle and engineering trades. The Victorian and Edwardian terraces of Earlsdon, Chapelfields and Spon End had no bathrooms at all when new. The bathroom you have today was probably squeezed into a back bedroom or an extension, and it is often small, awkward and covered in tile.
Tadelakt copes well with that. It runs into a niche, over a bench and around a reveal as one surface, and curves are easier for it than flat runs. The 1930s semis of Cheylesmore and Styvechale have larger bathrooms, and a wet room there can use tadelakt on the walls and floor in one continuous finish.
The wall behind still decides everything. Tadelakt is a finish and not a waterproofing system on its own. It wants a mineral, absorbent, stable base such as a lime or sand and cement render. Plasterboard in a wet area needs tanking and a suitable rendered base built up first, and a modern skim is a poor bed for it. We check this at the survey and say plainly what is needed.
Our tadelakt finishes are at home wherever there is water and a wish for something calmer than tile.
It is the wrong choice on a floor that takes heavy traffic, on untanked plasterboard, or where sharp straight lines are the whole point. It does not like acids, so limescale spray will harm it. Expect variation too, because two panels burnished on different days will not match exactly.
We survey before pricing, looking at the substrate, damp, movement, access and how the bathroom is used. Small questions can often be answered from photos first.
The sample board comes next, with lime fast colours such as clay reds, ochres, olive greens, plaster pinks, off whites and charcoals. Material is tinted to the approved sample before it ships. The job itself depends on timing, because the stone burnishing has a short window while the plaster is firm but not hard. Larger jobs in Coventry are planned in blocks of days so the team stays on site and finishes each wall properly. Dates are agreed once the sample and price are signed off. The tadelakt installation page explains more.
We sell tadelakt in 16kg tubs with the soap that finishes it, with tracked UK delivery, in the shop. Trade accounts are on the trade page.
We will also tell you it is the hardest finish we stock. The burnishing is physical, and a shower that has not been closed properly will wet through. For a bathroom you use daily, call us. To learn it, the tadelakt course runs at our training centres in Birmingham, London and Manchester.
If you want a seamless wet room in another material, look at microcement in Coventry. For dry walls, polished plaster in Coventry gives a shine and marmorino in Coventry a satin grain, while clay plaster in Coventry and limewash in Coventry are matt. concrete effect plaster in Coventry and liquid metal in Coventry complete the mineral range. The whole range is on our page for a decorative finishes specialist in Coventry, and the classic family is covered under Venetian plastering in Coventry.
On a properly prepared and tanked wall it is water resistant, and it lives with daily water for many years. The soap reaction forms the water repellent skin. It is wiped dry rather than scrubbed and re soaped occasionally.
Usually the tiles come off and a suitable base is built, because tadelakt wants a mineral, absorbent surface. We look at your wall from photos first and say what is needed.
Wipe it dry after use and avoid acidic cleaners such as limescale spray. Occasional re soaping keeps the surface water repellent.
No. The stone leaves a soft sheen with faint mottling, and joins are part of the character. If you want a uniform surface, we would suggest microcement instead.
To talk it through, call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and the postcode. The sample board is the place to start.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Coventry and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.