ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Limewash Ceilings, Preparation, Working Overhead and Colour
26 September 2026

Limewash Ceilings, Preparation, Working Overhead and Colour

A ceiling moulding meeting a beige painted wall, limewash on ceilings

A limewash ceiling is one of the easiest wins in the whole material. Lime has no sheen, so it does not glare under a light fitting or reflect the room back at you; it is breathable, which matters on an old lath ceiling and in a kitchen or bathroom; and because it is brushed rather than rollered it leaves no stipple and no cutting in line. It also forgives an uneven ceiling far better than emulsion does, because there is nothing shiny to reveal the hollows. If you are limewashing the walls, do the ceiling too.

If you want it installed, our own applicators handle limewash installation from survey to final coat.

The two things that catch people out are preparation, particularly on ceilings that have been emulsioned or stained, and the sheer awkwardness of working overhead with a thin, drippy material.

Why lime suits a ceiling

Four reasons, and they are all practical rather than romantic.

No sheen, no glare. Even a matt emulsion has enough surface to bounce light. A ceiling is seen at a shallow angle across its whole length, so any sheen at all reads as a dull shine near the window. Limewash has none.

It hides an imperfect ceiling. Old ceilings sag, ripple and carry a hundred years of repairs. Limewash softens all of it. This is the same logic we apply to walls in Venetian plaster ceilings, where texture and matt finishes do the heavy lifting overhead.

It breathes. On lath and plaster, on a solid walled cottage, or under a cold roof void, a breathable mineral coating lets moisture move rather than trapping it behind a film.

It is alkaline. Lime is hostile to mould, which is a genuine property of the material. In a bathroom or over a cooker that is worth having. It is not a fix for condensation, ventilation is, but it is a better surface to have up there.

Preparing the ceiling

Limewash needs a porous mineral surface to bond into. What is already up there decides the work.

Existing ceiling What it needs
Old limewash or soft distemper, sound Brush off loose material and dust, damp down, limewash straight over
Old limewash, flaking or heavily built up Scrape the loose layers back to something firm first
Emulsion, sound Wash, abrade, then a mineral primer. Lime will not bond into a resin film
Vinyl silk or flaking emulsion Strip or abrade back; do not limewash over a failing film
New plaster or plasterboard and skim, fully dry Dust off and prime to even out suction
Water stains, nicotine, soot Find and fix the source, then block the stain before any lime goes on
Textured coating Assess it, limewash will follow the texture, not hide it

Our primer handles previously painted and new plastered ceilings, with a 4.5 litre tub for a whole house. Stains are the one thing to take seriously: a thin mineral coat will not cover a tide mark, and lime has a habit of drawing old staining through. Deal with it before, not after.

Working overhead

Limewash is thin by design, and thin material overhead goes everywhere. The things that make it manageable:

  • Mask and sheet properly, including the floor, and accept that you will be wiping.
  • Use a wide soft brush and load it lightly. Overloading is what causes drips and runs.
  • Work in thin coats, cross hatching the strokes so the direction changes and the coat does not build up in lines.
  • Do the whole ceiling in one pass. Stopping halfway leaves an edge you will see.
  • Work away from the window and check the ceiling with a light held low along it before the coat sets.
  • Do the ceiling before the walls, every time.
  • Wear eye protection. Lime is caustic and it is going above your head.

Two thin coats are normal, with the first left to dry properly before the second. Lime looks patchy and alarming while it is wet and evens out as it dries and carbonates, so resist the urge to keep going back over it. The full method, brushes, thinning, wet edges, is in how to apply limewash.

How much you need

Ceilings drink more than walls if they are old, unprimed or previously limewashed, and less if they have been primed. Because porosity is the variable that matters most, we keep the figures in one place rather than quoting a number that will be wrong for your ceiling: see the coverage guide. Our tinted lime paint is £47 for 14 litres, tinted in the tub, and it is worth buying enough for the ceiling and the walls in one go if they are to match.

Colour on a ceiling

Most limewashed ceilings want to be lighter than the walls, but not stark white. Lime dries lighter than it looks wet, so a colour chosen at full strength for the walls will often read correctly on the ceiling thinned or in a paler tint of the same pigment.

Watch the undertone. A ceiling in a north facing room takes cool light all day and a grey leaning white can go flat and cold up there. A warm off white usually sits better. Test on a board and hold it up at ceiling height rather than judging it on a table. The angle changes everything. More on that in choosing limewash colours.

Old lime ceilings

If you have an original lime ceiling, limewash is the coating it was designed for and the one that will least trouble it. Two cautions. First, do not soak it: old ceilings and water are a bad combination, so damp down lightly rather than wetting the surface. Second, if the existing coating has built up over many decades, some of it may need to come off before you add more, layer upon layer eventually loses its grip.

And if a ceiling is failing structurally, that is a job for someone to look at properly before anyone decorates it. No coating fixes a ceiling that is coming away.

Questions we get asked

Can you limewash a ceiling that has been painted with emulsion?

Yes, if the emulsion is sound. Wash it down, abrade it to give some key, and apply a mineral primer, limewash cannot bond into a resin film on its own. If the existing paint is vinyl silk, or is flaking anywhere, get it back to a sound surface first rather than working over it.

Will limewash hide cracks and imperfections in a ceiling?

It softens them considerably, because there is no sheen to catch the light and no roller stipple. It will not fill anything. Cracks and holes need filling and the filler needs priming, or it will pull differently from the surrounding surface and show as a patch through the coat.

Does limewash drip badly overhead?

It will if the brush is overloaded. The material is deliberately thin, so load lightly, work in thin cross hatched coats and sheet everything below you. It is messier than rolling emulsion and considerably less messy than people expect once the brush technique settles.

Is limewash suitable for a bathroom or kitchen ceiling?

It is a good choice for both, being breathable and naturally alkaline, which mould dislikes. It is not waterproof, so it belongs on the ceiling rather than inside a shower enclosure, and it does not replace proper extraction. In hard used kitchens a breathable sealer helps it survive cleaning.

Where to go next: the limewash page covers the finish and the rooms it suits, limewash problems and fixes covers chalking and patchiness if something has gone wrong, and tinted lime paint, primers and sealers are all in the shop.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
DE