


A thin, seamless coating for floors, walls and showers, laid by our own artisans. Made for Battersea's extended terraces and new riverside apartments, where one continuous floor changes how a home feels.
Microcement in Battersea starts with one question, which is what lies under the floor. Zavoré installs microcement through its own artisans, and for materials we sell the lime built pastellone and beton stucco, which give the same seamless look. We are based in Birmingham, with a showroom and training centre in London, open by appointment. Photos of the room and a rough plan are enough to start.
A great many Battersea terraces have been opened up at the back, with a side return knocked through so kitchen, dining and garden meet in one long room. A continuous floor suits that room well, because there is no threshold to break the line between old hall and new extension.
The catch is the join between old and new. The original Victorian ground floor is normally suspended timber over a void, and the extension is usually a concrete slab. Those two move differently, and a rigid coating will show it. We look at that junction first, and where needed the timber is stiffened and boarded and a movement joint is carried through the finish instead of being buried.
Newer apartments near the river and around Nine Elms are a different story. Many have screeds laid over underfloor heating, and a screed must be fully dry and the heating brought up and back down gradually before anything is laid. Our survey checks both.
People choose our microcement surfaces for the lack of joints. In Battersea homes the usual jobs are these.
Microcement is not a way to skip preparation, and it will not rescue a moving floor. If your wall is going to take heavy fixings, or if the room is damp from a cause nobody has found, we would rather say so than quote. For the wider range see microcement across London.
First comes a survey of the substrate, flatness, cracks, damp and movement, plus how the room will be used and how we get materials in. Tiles, boards and screeds are each treated differently. Small questions can often be answered from photos.
Many Battersea flats sit above other flats, so noise, dust and timing matter. We work with building management rules, book lifts and loading bays, deal with permit parking and concierge access, and price congestion and ULEZ charges in. The job is planned in blocks of days so our artisans stay on site and lay primer, mesh, coats and sealer in the right order.
Dates follow once the sample and price are signed off. See the microcement installation page for the detail, and order a sample board to see a finish dry in the room. Flat owners should check with the freeholder or managing agent before work.
If you have your own decorator, the shop sells the lime built pastellone and beton stucco with tracked UK delivery, and trade accounts are available. A seamless floor is unforgiving, so we would keep floors for our team and leave walls for a confident decorator.
The microcement course runs at our training centres in Birmingham, London and Manchester, the same course at each.
For lime walls above a seamless floor, look at polished plaster in Battersea. A wall with the same quiet grey can be concrete effect plaster in Battersea, and a shower with running water might want tadelakt in Battersea instead.
Softer surfaces include limewash in Battersea, clay plaster in Battersea and marmorino in Battersea, and stone effects come as travertino in Battersea. Metal appears as liquid metal in Battersea. The craft side covers sculptural plaster in Battersea, bas relief in Battersea, murals in Battersea, mosaics in Battersea, gilding in Battersea, lacquered walls in Battersea, cornice and coving in Battersea and artificial rock in Battersea.
Everything sits under one decorative finishes specialist in Battersea. For the lime tradition behind the range, read Venetian plastering in Battersea, or take the wider view with Venetian plastering in London.
Usually, if they are firmly stuck, clean and keyed. Loose tiles are lifted and made good, grout lines are filled and the surface is reinforced first. We check this at the survey.
It can be. A springy suspended floor will crack a rigid coating, so the boards are stiffened first. We say plainly if a floor needs that work.
Often, yes, once the screed is fully dry and the heating has been run up and down gradually. Tell us what is in the floor and we will check at the survey.
The sealer makes the surface waterproof, but the wall behind still has to be tanked correctly, as it would be under tile. Grout free surfaces are easy to wipe clean.
Call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and the postcode. A sample board is the easiest first step.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Battersea and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.