


Lime burnished with stone and sealed with soap, for showers with no grout. We install tadelakt across Salalah, from villa bathrooms to hotel spas, and anywhere in Oman.
Tadelakt in Salalah gives a shower or a wet room one soft, seamless lime surface with no tiles and no grout. Zavoré supplies it, installs it and teaches it. We install tadelakt across Salalah and anywhere in Oman, in villa bathrooms, guest washrooms, hotel spas and hammam style rooms. It is lime plaster pressed with a smooth stone and finished with olive oil soap, which makes it water resistant without any film on top. To start, send photos of the room and a few rough measurements.
Family villas in Al Dahariz, Al Awqad, Al Wadi and New Salalah usually have several bathrooms, plus a guest washroom near the majlis. Most were tiled from floor to ceiling, and grout lines darken and silicone peels over the years. Tadelakt replaces all of that with one continuous surface that curves into niches, wraps a bench and follows an arch without a single joint.
It also has deep roots in this part of the world. Lime plaster and the bathhouse tradition are familiar across the region, and a tadelakt hammam room or steam corner fits a Salalah villa or a coastal resort naturally. Because lime breathes and suits solid masonry, it sits well on the block and render walls most local homes are built from.
Its home is the shower and the wet room, where it lives with daily water. It also suits basins carved into a wall, bath surrounds, shower benches, niches and curved partitions, and in hotels it is used in spa rooms and guest bathrooms. Our tadelakt page explains the stone and the soap in detail.
It has limits. Tadelakt is not for floors that take heavy traffic, and it must not go onto untanked plasterboard. Acids and limescale sprays damage it. The burnishing takes the time it takes, so it is a labour led finish. Lime is caustic while wet, and the work is done with gloves and eye protection.
It starts with photos of the bathroom, a drawing if there is one and rough measurements. We then survey the room before giving any price, checking the walls, the waterproofing and the falls to the drain. A burnished sample in your chosen colour is made for you to approve, and the material is tinted to it before it ships.
Dates are agreed and the job is booked in blocks of days, because tadelakt is laid in two thin coats and then burnished with a stone at exactly the right moment of set, and the same artisans need to see each wall through. Soaping follows. At the survey we talk through the climate, the building and how the bathroom is used. The tadelakt installation page shows each step.
Tadelakt is supplied from the UK with the soap that finishes it, sent to your Salalah address on a tracked service and tinted to your approved sample. We quote delivery by email, and any import duty is set by Oman and paid by the buyer. Begin with a sample board held in the bathroom, and see the full range in our shop.
It is the hardest lime finish to learn, which is why the tadelakt course matters. It is taught in person in the UK, at our training centres in Birmingham, London and Manchester. Learners arrive from abroad, and airport or station pickup can be arranged with the booking.
A tadelakt bathroom often sits beside a floor in microcement in Salalah, which we install. On the bedroom side of the door, limewash in Salalah and clay plaster in Salalah keep the same mineral calm. For a polished majlis wall, compare polished plaster in Salalah with marmorino in Salalah. Contemporary rooms might suit concrete effect plaster in Salalah or a feature wall in liquid metal in Salalah. The Salalah page for our decorative finishes specialist covers every craft, and Venetian plastering in Salalah and Venetian plastering in Oman cover the classic lime wall.
Yes. We install tadelakt in villas, apartments and hotels throughout Salalah, from Al Saada to the resort developments on the coast, and anywhere else in Oman. Begin with photos, drawings and rough measurements of the bathroom.
It is water resistant, not a waterproofing system. The stone and the olive oil soap close the surface so water runs off, but the wall behind a shower still has to be properly tanked first. Done that way it lives happily with daily use.
Wipe it dry after use and clean it with a mild soap. Avoid acid cleaners and limescale sprays, which attack lime. Every so often the surface is soaped again to refresh it.
No. Tadelakt has a soft, low sheen with faint mottling and gentle undulation, and panels burnished on different days vary a little. That variation is the character of the finish.
Call +44 7592 929191 any day from Monday to Saturday, 9am to 6pm UK time, or send photos of the bathroom, rough measurements and the address to sales@zavore.co.uk. A burnished tadelakt sample board is the easiest way to judge the sheen.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Salalah and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.