


Polished plaster walls are walls finished in thin layers of lime and marble plaster, pressed and burnished with a steel trowel until the surface turns smooth, cool to the touch and softly reflective. A polished plaster wall suits living rooms, hallways, bedrooms and feature walls in homes across the UK, and it is repaired rather than replaced. Zavoré installs, supplies and teaches polished plastering, with every polished plaster finish from a quiet satin to a deep gloss.
If you would rather have the finish laid for you, our page on polished plaster shows the colours and textures, and Venetian plaster installation explains how our artisans survey, sample and plan the work in homes across the UK.
Paint is a coloured film rolled over a wall. Polished plaster is a material with body. It is made from slaked lime and finely ground marble, tinted with pigment and spread with a flexible steel trowel in coats thinner than a coin. As each coat firms up, the trowel is pressed over it again and again. That pressure closes the surface and lines up the tiny marble particles, which is what gives the depth and the gentle shine.
The result has movement that paint cannot copy. Darker and lighter tones sit beside each other, trowel marks overlap, and light seems to travel into the wall rather than bounce off it. Venetian plaster is the most familiar name for this family, and many people use the two terms for the same thing. Marmorino, a slightly grainier lime finish, sits in the same group with a more matt, stony feel.
Because the binder is lime, the finish is breathable and naturally resists mould, which makes it a kind choice for solid brick and stone walls in older houses. Lime is caustic while wet, so anyone applying it needs gloves and eye protection.
Preparation decides how a polished plaster wall will look for the rest of its life. A burnished surface catches light across its whole face, so a bump or a hollow that hides under matt emulsion becomes plain to see. Before a single coat goes on, the wall should meet four tests.
Corners, sockets and window reveals are planned too, so the finish stops neatly.
A typical polished plaster finish is built in stages. A first coat sets the colour and fills the fine texture of the background. A second, thinner coat is laid in overlapping strokes to create the pattern. On many finishes a third skim follows. Then comes burnishing, where the trowel is worked firmly over the nearly dry plaster until it closes and starts to shine.
Sheen is a choice, not an accident. Light pressure and fewer passes leave a satin surface with a soft glow. Heavier burnishing and a fine final coat give a glossy, glassy finish close to polished stone. A coat of wax, buffed with a cloth, adds water resistance and a richer lustre, and a natural wax keeps the wall breathable. We agree the sheen on a sample board before work starts, because the same colour can look quite different at matt and at gloss.
Almost any dry interior room. Living rooms and dining rooms are the classic place for a polished plaster wall, often around a fireplace or behind a sofa. Hallways and staircases benefit because the finish is tough and wipeable once waxed. Bedrooms suit softer satin finishes in warm whites and stone shades.
Kitchens are fine away from direct splashes, and bathrooms are fine outside the wet zone. Inside a shower, polished plaster is not the right material. There, tadelakt or microcement installation over a properly waterproofed wall is the answer, and you can read more in our guide to Venetian plaster in bathrooms.
Day to day care is simple. Dust with a soft dry cloth, and wipe marks with a damp cloth and a little mild soap on waxed finishes. Avoid solvent cleaners, abrasive pads and anything acidic, which can dull lime.
Repairs are one of the strengths of lime. A small chip or a scuff can usually be filled with the same tinted plaster, burnished and waxed until it blends into the surrounding pattern. A whole wall rarely needs redoing. Keep a little of the original material, labelled with its colour reference, so a future repair matches.
We do not publish installation prices, because two walls of the same size can need very different amounts of work. The things that move a quote are the condition of the background and how much preparation it needs, the area and height, access and scaffolding, the finish and its number of coats, the sheen level, and how many rooms the job covers. Everything is set after photos, a survey and a sample you approve. Our article on polished plaster cost in the UK goes into each factor.
Learning to polish plaster is very possible, but it takes practice. The trowel angle, the timing of each coat and the pressure when burnishing are learned by hand, not from a video.
If you want to do it yourself, a course is the surest start. The Zavoré Academy in Birmingham, with centres in London and Manchester, runs a Beginner Course over 3 days, an Advanced Course over 4 days and 1 to 1 Training over 3 days, with all materials included. See Venetian plaster training for dates. If you want a finished wall without the learning curve, our artisans install it for you.
For the basics, read our complete guide to what Venetian plaster is, and our guide to choosing Venetian plasterers in London and the UK.
Everything to know before choosing polished plaster for your home.
In everyday use, yes. Polished plaster is the general name for burnished lime and marble finishes, and Venetian plaster is the traditional Italian version of it. Marmorino and travertino belong to the same family but have more texture and less shine.
Yes. The board must be fixed firmly, the joints taped and reinforced, and the surface sealed with a suitable primer. Without that preparation, joints can show through or crack under a polished plaster finish.
Waxed polished plaster resists splashes and wipes clean, but it is not waterproof. It suits kitchens and bathrooms away from running water. For showers, choose tadelakt or microcement over a tanked wall.
It depends on the area, the condition of the wall and the finish, because each coat must firm up before the next. We plan the work in blocks of days after the survey so the same artisans stay with the job from start to finish.
Send us photos of the room, rough measurements and the address, and we will come back with next steps. Call +44 7592 929191, Monday to Saturday from 9am to 6pm, or email sales@zavore.co.uk. To see colour and sheen in your room first, order a sample board.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.