


Slaked lime and finely ground marble, burnished with a steel trowel until it shines. Buy it for your own decorator or have our applicators lay it in your Sheffield home.
Polished plaster in Sheffield suits a city of tall Victorian halls, stone built villas and converted works. It is slaked lime and finely ground marble laid in thin coats and burnished with a steel trowel until it reflects. Zavoré supplies and installs authentic Italian lime based Venetian plaster, and everything we install, we teach. We are based in Birmingham, where our Academy is, and our own applicators work across the UK. The place to start is a sample board, tinted to the colour you are considering.
Sheffield is built on hills, and its older streets are full of substantial Victorian houses. Round Nether Edge, Broomhill, Ranmoor and along Ecclesall Road there are stone built villas with generous halls, tall rooms and staircases that rise through the house. These are the places polished plaster was made for. A tall, plain hall wall is a big quiet surface, and a burnished lime finish gives it depth without fuss.
There is one thing to say plainly about older walls. A polished surface shows every dip, and a wall that has been patched for a century is rarely flat. Before we quote we look at the plaster, and we tell you honestly if it needs skimming first. Money spent on making a wall true is what makes the shine look expensive rather than wavy.
Newer Sheffield homes are different. Flats in converted works around Kelham Island and new apartments in the centre have plasterboard walls, which suit polished plaster once the joints are reinforced and the right primer goes on. Flat, square walls take a burnish very well.
Our polished plaster finishes work on walls you see across a space, where the sheen can shift as you move. In Sheffield that usually means these places.
It is the wrong finish inside a shower enclosure or a steam room, where tadelakt is the answer. It does not belong directly behind a hob, or on a wall that still moves, such as loose lath or an extension that is still settling.
We survey before pricing. That covers the substrate, how flat the wall is, cracks, damp, access and how the room is used. Small questions can often be answered from photos first. The sample board comes next, and it is where you settle the colour and the level of shine. Material is tinted to the colour on the approved sample before it ships, from 48 house colours or any NCS reference.
Sheffield is some way from our centres, so the work is planned in blocks of days. The team stays on the job and lays each coat in order, then burnishes and waxes. Dates are agreed once the sample and price are signed off. Our Venetian plaster installation page explains the process in more detail.
Polished plaster is the hardest finish we sell to lay well. The burnish has a short window on each patch, and a missed one leaves a dull wall or a trowel drag. If you are a decorator wanting to offer it, we sell the materials with tracked UK delivery through our shop, and trade accounts exist through trade. For learning the craft properly, our training runs at our centres in Birmingham, London and Manchester.
For a hall you will only do once, we would rather lay it ourselves.
Polished plaster sits well beside marmorino in Sheffield, which has visible grain and a softer sheen, and limewash in Sheffield for rooms that want a matt, cloudy wall. Where water is involved, look at tadelakt in Sheffield or microcement in Sheffield. For a quieter, chalkier wall there is clay plaster in Sheffield, and for a cool industrial look concrete effect plaster in Sheffield. If you want shimmer, see liquid metal in Sheffield. The wider picture is in decorative finishes specialist in Sheffield, and the original technique is covered in Venetian plastering in Sheffield.
Broadly, yes. Polished plaster is the English trade term, stucco veneziano the Italian one and Venetian plaster the name that travelled. All describe lime and marble burnished to a shine. Ours is genuine lime, and it behaves like lime.
Yes, if the wall is made flat first. Old lime plaster is often wavy after a century of repairs, and a reflective finish will find every dip. We survey and say plainly if a wall needs skimming before we price.
Yes. Plasterboard needs its joints reinforced and the right primer, and then it takes a burnish well because the walls are flat. We check this at the survey.
On the walls, waxed or sealed, yes. Inside the shower enclosure no, because Venetian plaster is not for standing water. Tadelakt or microcement on a properly waterproofed wall is the right answer there.
Tell us about the wall and the room. Call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and the postcode. You can also order a sample board and start from there.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Sheffield and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.