


Zavoré installs Venetian plaster in Ajman homes, from apartments in the towers along the Corniche and the creek to family villas in Al Rawda, Al Mowaihat and Al Yasmeen. Our own artisans lay lime and crushed marble by hand in thin coats, then burnish the surface to a soft sheen that reads like polished stone. Every Ajman job begins with your photos and a survey of the walls, and a price only follows once that survey is done.
For a fuller picture of how a job is planned from first contact to final coat, our guide to Venetian plaster installation sets out each stage. The page on Venetian plastering in Ajman goes deeper into the emirate itself and the other decorative finishes we lay there.
Ajman is the smallest emirate, but its homes vary a great deal. Along the Corniche and beside the creek, apartment towers tend to have wide living rooms with large areas of glazing and long views over the water. In those rooms one wall usually carries the design, often the wall behind the sofa or a fireplace wall, and a polished lime surface gives it a depth that paint struggles to match.
Inland, districts such as Al Rawda, Al Mowaihat, Al Yasmeen and Al Helio are mostly villas. Many have a formal majlis near the front door, a double height entrance hall and a more relaxed family room further back. Here Venetian plaster can run right round a room so that it reads as one calm, continuous surface. Al Zorah adds newer villas and apartments set among the mangroves and the golf course, where clean modern rooms pair well with a quieter satin finish.
In most cases it can. Tower walls are usually plasterboard or a fresh skim coat, and both take Venetian plaster well once they are prepared properly. Plasterboard joints need reinforcing and the right primer has to go on before the first coat, otherwise fine lines can show through later. Polished finishes reveal every dip, so flatness matters more than it would for paint, and we judge it at the survey.
There are practical points too. Most towers and communities have management rules on working hours and deliveries, so check with yours before work is booked. If you rent, ask your landlord first. Rooms in Ajman are air conditioned, and at the survey we talk through the building, the climate and how each room is used so the finish and the preparation suit the space.
Classic Venetian plaster gives a marble look with soft movement and a gentle shine. It is not marble, but because each thin layer lets a little of the one beneath show through, it has a depth that flat colour lacks. For a formal reception room that should feel like a slab of dark stone, polished plaster burnished to a higher gloss is worth considering.
A whole majlis often suits marmorino, which has a satin surface and a visible grain that stays calm across a large area. A travertino finish gives the banded character of travertine stone, limewash brings a soft matt cloud to bedrooms and corridors, and concrete effect suits a modern kitchen or a family room in Al Zorah. For a feature in an entrance hall, bas relief adds sculpted shapes in plaster.
Bathrooms are where the rules change. Venetian plaster is fine on the dry walls of a guest washroom, but it is not for inside a shower. In wet zones we lay tadelakt, or we install microcement on a waterproofed wall. A sealer makes microcement washable, yet the wall behind a shower still needs proper tanking underneath.
We do not publish installation prices, and there is a good reason. The figure depends on the size of the walls, the finish chosen, the condition of the surface, how much reinforcing and priming the plasterboard needs, ceiling heights, access in the building and how the work fits around the household. Two rooms of similar size can need very different preparation. That is why the survey always comes first and the price follows it, with nothing quoted from photos alone.
We do not give timescales in weeks, because the length of a job depends on the walls and is set at the survey.
Our range runs to 48 house colours, and we can also match any NCS reference if your designer has already chosen a shade. Colour reads differently on a tall villa wall, so view it in the room morning and evening. A sample board is the simplest way to begin, before the approved sample is made for the survey.
Some villa owners and fit out firms in Ajman already work with applicators and only need the plaster itself. We can supply Venetian plaster, marmorino, limewash and our other plaster materials alone from the UK, tinted to the approved sample before dispatch and sent on a tracked service. Delivery is quoted individually, and any import duty or tax is set by the UAE and paid by the buyer. The range is in our shop.
Applicators who want to learn the finish can train with us in person in England, at the Zavoré Academy in Birmingham or our London and Manchester centres. The Beginner Course lasts 3 days, the Advanced Course 4 days and 1 to 1 Training 3 days, with all materials included, and airport or station pickup can be arranged when you book. See the training page for details. For the rest of the country, read about Venetian plastering in the UAE.
Yes. Our own artisans install in every district of Ajman, from Corniche towers to villas in Al Rawda, Al Helio and Al Zorah, and right out to Masfout. We also install in every other emirate. Send photos and rough measurements and we will plan a survey of the walls.
It suits a majlis very well, because a lime finish carried round the room makes it feel calm and finished. Many people choose marmorino for a large majlis since its satin grain stays restful over big walls, while polished Venetian plaster suits a smaller, more formal room.
On the dry walls, yes, and it looks lovely in a guest washroom. It should not go inside the shower itself. For the wet area we use tadelakt or install microcement on a properly waterproofed wall, with tanking behind it.
To talk about your Ajman apartment or villa, call +44 7592 929191, Monday to Saturday from 9am to 6pm UK time, or write to sales@zavore.co.uk with photos of the rooms, rough measurements and the address. Ordering a sample board first lets you see the colours on your own walls.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.