


Polished plaster is a decorative wall finish made from lime and finely ground marble, laid by hand in very thin coats and then burnished until it takes on a soft or glassy sheen. It gives walls the depth and cool movement of stone without slabs or joints. In the UK the term usually describes the glossy end of the Venetian plaster family. Zavoré installs, supplies and teaches polished plaster, and our own artisans lay it across London and the UK.
You can see the full range on our polished plaster page, and Venetian plastering across the UK shows where we install it. This guide explains the material, the main types and how a polished wall is made.
Traditional polished plaster starts with slaked lime, aged as a putty, mixed with marble ground to different grades of fineness. Coarser grades build the early coats, and the finest grades go on last so the surface can close and shine. Colour is added as pigment, so the tint runs through the material rather than sitting on top like paint.
As lime cures it slowly draws carbon dioxide from the air and hardens back towards limestone. That is part of why a lime finish feels so close to stone. It also means the wall remains breathable, which matters on old solid masonry. Some modern products use an acrylic binder instead, which is more flexible but forms a film over the wall.
The names overlap, and people use them loosely. Venetian plaster, or stucco veneziano, is the broad family of lime and marble finishes that grew from Italian craft. Polished plaster is the English trade term, and in practice it most often describes the smoothest, most reflective finishes in that family, where the surface is burnished to a high sheen and often waxed.
Within the same family sit quieter finishes. Marmorino has a finer, more matt grain with a gentle sheen, and travertino imitates the layered, pitted look of travertine stone. Tadelakt is a related lime finish from Morocco, polished with a stone and sealed with soap for wet areas. Our page on the classic Venetian plaster installation covers how these are laid.
Any of these can be tinted to one of 48 house colours or matched to an NCS reference.
Every coat has to be laid in order, at the right moment, which is why our jobs are planned in blocks of days so the same artisans stay on the job from start to finish.
Polished plaster works on almost any dry interior wall. Feature walls in living rooms, halls and stairwells, dining rooms, bedroom walls behind the bed and powder rooms are the classic choices. In commercial spaces it appears in hotel lobbies, reception areas and boutiques. A fireplace wall is another favourite, because the warm light of a fire moves across the burnished surface.
It is not for inside showers. Tadelakt or microcement on a waterproofed wall is the right finish there. Polished plaster also dislikes walls that move or flex, which is why preparation matters so much.
No. Polished plaster gives a marble look, but it is not marble. It contains marble dust, so it has a cool, stony feel, but it is laid as a seamless coat a few layers thick rather than cut and fixed in slabs. That makes it far lighter, free of joints and easy to run around curves and corners.
A properly laid lime polished plaster cures hard and, once waxed, can be wiped clean. Like any wall finish it can be marked by heavy knocks, but small areas can often be repaired locally by a skilled hand without redoing the whole wall.
Yes, provided the joints are reinforced, the boards are firmly fixed and the right primer is used. Polished finishes show every dip, so the board must be flat. Sometimes a skim coat goes on first.
Yes. We teach in person at the Zavoré Academy in Birmingham and at our London and Manchester centres. The Beginner Course is 3 days, the Advanced Course 4 days and 1 to 1 Training 3 days, with all materials included.
You can visit our London showroom and training centre by appointment, or order the sample board and view it in the room, morning and evening, before deciding.
To talk about polished plaster for your home or business, call +44 7592 929191, Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos, rough measurements and the address. If you have your own decorator, plaster materials are available in our shop.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.