


Seamless microcement floors, walls and worktops installed by Zavoré artisans, with lime built alternatives for walls.
From stone cottages with new bathrooms to flats built in the last few decades, microcement in Stirling gives a seamless surface with no grout lines on floors, walls and worktops. Zavoré is based in Birmingham, where the Academy is, and our nearest centre is the showroom and training centre in Manchester, open by appointment. We install microcement ourselves, and for walls we also supply lime built alternatives. Send photos and rough measurements and we can talk it through.
Stirling mixes very old and quite new. The Old Town climbs towards the castle in stone, while the 1960s campus of the University of Stirling and later housing around the city have flat ceilings, plain walls and square rooms. Microcement sits naturally in the newer buildings and gives a calm backdrop in a refitted older one.
It is cement, fine aggregate, polymer and pigment, trowelled in thin layers over a primed and reinforced base. Because it is applied rather than laid there are no joints, so a floor can run into a skirting, up a wall and around a shower tray as one surface.
That is a real gain in a cold climate. Fewer joints means fewer places for water to creep, and a continuous floor feels tidy in a hall where wet boots and dogs arrive every day.
Bathrooms and wet rooms are the usual start. Shower benches, niches and reveals can be finished in the same material as the walls. Kitchens use it on worktops and splashbacks, and open plan ground floors suit no thresholds between rooms.
Stair treads and landings can be done too, and shops, offices and cafes use it when they want a calm commercial space. Read more on the microcement page.
Microcement is only as good as its base, primer, mesh and sealer. It cannot bridge a floor that still moves. Springy joists, loose tiles or a green screed will show through, and we say so at survey instead of covering a problem. It can often go over firmly stuck tiles that are degreased, keyed and reinforced.
Photos come first, and often answer small questions. Then we survey before pricing. We check the substrate, flatness, cracks, damp, movement, access and protection of the rooms around the work. A seamless floor is laid wet in one go, so the room has to be clear and the access sorted.
You approve a sample board or sample, and the colour is tinted before it ships. Our own artisans travel to Stirling and work in blocks of days so they can lay each coat in order. Dates follow once the sample and price are signed off. The process is set out on our microcement installation page.
Owners of listed buildings or homes in a conservation area should check with the council first.
For materials we sell only the lime built pastellone and beton stucco, which give the seamless look on walls and floors. People using their own decorator can order them with tracked UK delivery through the shop, and trade accounts are on the trade page.
Everything we install, we teach. Our microcement course runs at our centres in Birmingham, London and Manchester.
For wet rooms the older answer is tadelakt in Stirling, and for a polished shine on a hallway there is polished plaster in Stirling. A satin stone effect with grain comes from marmorino in Stirling, while concrete effect plaster in Stirling gives the cloudy grey of cast concrete on a wall. Old solid walls often prefer limewash in Stirling or clay plaster in Stirling, and one shimmering wall is the job of liquid metal in Stirling. See also our decorative finishes specialist in Stirling page and the full guide to Venetian plastering in Stirling.
Usually yes, if they are firmly stuck, degreased and keyed. Loose tiles are lifted and made good, grout lines are filled and the surface reinforced, otherwise they shadow through later.
The sealer makes it water resistant, and the wall behind must still be tanked properly, as it would be under tile. We check this at survey.
We install microcement. For materials we sell the lime built pastellone and beton stucco, which give a similar seamless look on walls and floors.
Yes, flat walls and plain rooms suit it well. We check the floor for movement and the substrate for flatness before quoting.
Telephone 07592 929191, Monday to Saturday from 9am to 6pm, or email sales@zavore.co.uk with a few photos, rough measurements and the postcode. You can also start with the sample board.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Stirling and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.