


Moroccan lime plaster, burnished with a stone and soaped, for Dublin shower rooms, en suites and bathrooms without tile or grout.
Water, steam and a small room are what bring people to tadelakt in Dublin. Zavoré installs tadelakt across Ireland, in the Republic and Northern Ireland, with our own artisans travelling over from Great Britain, and supplies the plaster and soap for decorators who prefer their own team. We are based in Birmingham, where the Academy is. A few photographs of the bathroom and the wall behind it tell us where to begin.
Tadelakt is lime plaster with plenty of fine limestone in it, laid in two thin coats and compressed with a smooth stone while it sets. Olive oil soap is then worked in, and it reacts with the lime to leave a water repellent skin. There is no film and no sealer, so the wall stays breathable.
Dublin is full of bathrooms that were squeezed into houses never designed for them. Georgian and Victorian terraces in Rathmines, Ranelagh and around Mountjoy Square often have a bathroom on a half landing, a shower in a former dressing room or an en suite tucked under the roof. Walls there are rarely square, and tadelakt follows curves, niches and rounded corners with no tile edge to trim around. In basement flats and garden level rooms, where air is damp, a lime surface that breathes is a sensible choice.
Coastal homes in Clontarf, Dalkey and Dún Laoghaire bring salt air, and spa rooms and hotel bathrooms across the city suit the hammam feel of the finish.
Tadelakt is a finish and not a waterproofing system on its own. The shower wall must be tanked and given a mineral, absorbent base such as a suitable render. Bare plasterboard is not enough in a wet area, and a modern skim is a poor bed for it. Corners are formed radiused, because a stone cannot burnish into a sharp angle.
We survey first and say plainly what the base needs. In the Republic, many older buildings are protected structures, so owners should check with the local city or county council before altering a bathroom in one.
The surface is soft and low in sheen, with faint mottling that catches the light differently through the day. Colours run to clay reds, ochres, olive greens, pinks, off whites and charcoal, and we tint to the approved sample before it ships. Expect variation, because panels burnished on different days will not match exactly. Our tadelakt page shows more.
Care is simple. Wipe or squeegee after use, wash with mild soap and soap it again now and then. Bleach, limescale removers, bathroom sprays and scouring pads attack lime and should stay out of the room.
Start with photographs, then a survey of the substrate, the tanking, access and how the room is used. A burnished sample board in your colour is the honest way to judge the sheen. Our artisans work in blocks of days, because the burnishing window is short and each coat must go on in order, and dates follow once the sample and price are signed off. See the tadelakt installation page for more.
We ship plaster and soap to Ireland by tracked delivery from the shop, and trade accounts are on the trade page. It is the hardest lime finish we stock, so a bathroom you use every day is one to leave to us. If you want to learn, the tadelakt course runs at our centres in Birmingham, London and Manchester.
Another seamless wet room route is microcement in Dublin. Dry walls in the same bathroom suit polished plaster in Dublin, marmorino in Dublin, limewash in Dublin or clay plaster in Dublin. Greyer rooms look to concrete effect in Dublin, and a touch of shimmer to liquid metal in Dublin. The lime family begins with Venetian plastering in Dublin, and everything we make is listed under decorative finishes specialist in Dublin.
Yes, when it is burnished and soaped properly and laid on a tanked, correctly rendered wall. The waterproofing is a system, and tadelakt is the visible part.
Not in a wet area. It needs an absorbent mineral base, so the wall is tanked and rendered first.
With mild soap and water. Avoid bleach, limescale remover and abrasives, and squeegee the walls after use.
No. Hand burnished lime varies a little, and the joins are part of the character of the finish.
Call 07592 929191 (+44 7592 929191 from the Republic of Ireland), Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos, rough measurements and your Eircode or postcode. Order a burnished sample board first.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Dublin and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.