


Lime and marble powder, trowelled thin and burnished until it reflects. We install polished plaster across Al Ain and anywhere in the UAE, after a survey and a sample you approve.
Polished plaster in Al Ain answers a request we hear often from the Gulf, a marble look on the walls without cutting and fixing stone. Zavoré supplies it, installs it and teaches it, and our artisans install polished plaster all over Al Ain and anywhere in the UAE. It is slaked lime and marble ground to a fine powder, laid in near transparent coats and burnished with a steel trowel until it shines. The easiest way in is to email a photo of the wall with rough measurements.
Al Ain has kept its skyline low, so most families live in villas rather than towers. Walk through Al Mutaredh, Al Towayya, Al Masoudi or the newer streets of Al Yahar and you see generous houses with formal entrances, wide halls and a majlis set apart for guests. Those are exactly the rooms where a reflective wall earns its place, because people stand in them, look around and take in the surfaces.
A burnished lime wall has a depth paint never reaches. Each thin coat lets a little of the one beneath show, so the colour clouds and shifts as you cross the room and as the daylight from the courtyard moves around. In a large majlis with tall ceilings, that movement keeps a long wall from feeling bare, and it sits well with carpets, carved timber doors and brass lamps.
It is not for every wall. Keep it out of a shower or steam room, away from directly behind a hob, and off any wall that moves. Because a reflective surface finds every hollow, an uneven wall has to be made flat first, and sometimes that preparation is the bigger job. Read more about the material on our polished plaster page.
Photos, drawings if there are any, and rough measurements come first. We study them, then survey the walls before quoting, checking flatness, any patching and the base. New villa walls are often block with a render or skim, while extensions and partitions may be plasterboard, where joints need reinforcing and the right primer. We also talk through the climate, the building and how each room is used.
A sample in your colour and sheen follows for approval, and the plaster is tinted to match it before it ships. Dates are then agreed and the work is booked in blocks of days, so the same artisans lay every coat, catch the burnish at the right moment and wax the finished wall. The full sequence is on our Venetian plaster installation page.
Applicators in Al Ain can order the material on its own. Polished plaster is supplied from the UK in 48 house colours or any NCS reference, tinted to the approved sample and sent to your address on a tracked service. Delivery is quoted by email, and import duty is set by the UAE and paid by the buyer. See the primer, plaster and wax in the shop.
This is the hardest finish we sell, because the burnish has a short window. If you want to learn it, our Venetian plaster courses are taught in person in the UK, at the Zavoré Academy in Birmingham and at our London and Manchester centres. Choose the Beginner Course over three days, the Advanced Course over four, or 1 to 1 Training over three, with all materials included. Many students travel from abroad, and we can arrange an airport or station pickup when you book.
If a softer sheen suits the room better, look at marmorino in Al Ain, the satin, grained cousin of a polished wall. Showers call for tadelakt in Al Ain, and floors that run without joints for microcement in Al Ain. Matt walls come from limewash in Al Ain and clay plaster in Al Ain, a cooler modern look from concrete effect plaster in Al Ain, and shimmer from liquid metal in Al Ain. Our guides to Venetian plastering in Al Ain, Venetian plastering in the UAE and our decorative finishes specialist in Al Ain page show the full range.
Yes. Our artisans install polished plaster in every district of Al Ain and right across the UAE. Photos and rough measurements sent to sales@zavore.co.uk are all we need to begin.
Broadly, yes. Polished plaster is the English trade term and stucco veneziano the Italian one. Both mean lime and finely ground marble burnished to a shine. Ours is lime, not an acrylic paste sold under the same name.
On a sound wall that does not move, no. It is a thin hard skin, so it fails where the base moves, such as an untaped board joint or a wall still drying out. That is why the survey comes before the price.
On the walls, waxed, yes, and with no grout there is nowhere for mould to sit. Inside the shower we would use tadelakt or microcement over a waterproofed wall instead.
Phone +44 7592 929191 between 9am and 6pm UK time, Monday to Saturday, or send photos, rough measurements and the address to sales@zavore.co.uk. Before you commit a room, put a sample board against the real wall in its real light.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Al Ain and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.