


One continuous surface from the hall to the kitchen and into the shower, with no grout and no thresholds. We install microcement across Al Ain and anywhere in the UAE.
Microcement in Al Ain suits the way families here use their homes, with large ground floors, busy kitchens and several bathrooms in one villa. Our artisans install microcement across Al Ain and anywhere in the UAE. It is a thin coating trowelled by hand over floors, walls and worktops, so there are no grout lines and no joints. Send photos of the space with rough measurements and we will tell you what the base needs.
Most of Al Ain lives at ground level. The city has stayed low rise, and districts such as Al Khabisi, Al Jimi, Asharej and Al Maqam are full of villas where the entrance hall, family living room and kitchen open into one another. A floor that runs through all of them without a single threshold makes those spaces feel calmer and larger, which is why microcement flooring is so often the first request.
Many older villas in the city were finished with large ceramic tiles, and owners renovating them want a fresh surface without the dust and noise of lifting every tile. Microcement can often go straight over sound tiles. In new homes going up around Zakher and Al Foah it can be specified from the start, laid over a dry screed with the bathrooms and kitchen in mind.
Typical uses are bathroom floors and walls, walk in showers with built in benches and niches, kitchen worktops and splashbacks, staircases, and whole ground floors. In commercial settings it suits cafés, clinics, retail units in the malls and hotel corridors, where a calm surface with no grout to clean is welcome. Our microcement page explains the material in more detail.
The finish is only as good as what is under it. Springy floors, loose tiles, a screed that is still wet or a structural crack will all show through, and no coating bridges them. Movement joints in the structure are carried through the surface rather than hidden, and corners and junctions are reinforced. Seamless finishes also carry a soft cloud from the trowel, so if you want a dead uniform grey, a sheet product will suit you better.
It starts with your photos, plans and measurements. We go through them, then survey the floors and walls before any price, because the substrate decides most of the cost. A sample in your chosen colour and sheen comes next, and once you approve it the finish is tinted to match.
Floors have to be laid wet across the whole room in one go, so we plan the layout and the number of hands before work begins. Jobs are booked in blocks of days, with the same artisans working through primer, mesh, coats and sealer in order. We also talk through the climate, the building and how the room is used during the survey. Our microcement installation page sets out each step.
To learn the work, our microcement course is taught in person in the UK at our training centres. Students travel from abroad, and airport or station pickup can be arranged when you book. Walls are kinder to learn on than floors.
Above a seamless floor, the walls decide the mood. The cool grey of concrete effect plaster in Al Ain matches microcement closely, while tadelakt in Al Ain is the traditional lime answer for a shower. For a marble look on a majlis wall see polished plaster in Al Ain or the satin grain of marmorino in Al Ain. Softer matt walls come from limewash in Al Ain and clay plaster in Al Ain, and a feature with shimmer from liquid metal in Al Ain. The whole range is on our decorative finishes specialist in Al Ain page, with more on Venetian plastering in Al Ain and Venetian plastering in the UAE.
Yes. Our artisans lay microcement in every part of Al Ain and anywhere else in the UAE. Email photos, plans and rough measurements of the floors and walls to get started.
Often, yes, and that is a large part of its appeal. Tiles must be firmly stuck, degreased and keyed, with hollow ones lifted and made good. Grout lines are filled and reinforced. If the floor moves, the tiles come up first.
The sealer is what makes the surface waterproof and washable, not the coating itself. The wall or floor behind still needs proper tanking, exactly as it would under tile.
It cracks when what lies beneath it moves. On a rigid, dry, primed base with structural joints carried through, it stays sound. That is why preparation takes longer than the finish.
Our number is +44 7592 929191, open Monday to Saturday from 9am to 6pm UK time. You can also email sales@zavore.co.uk with photos of the floor, rough measurements and the address. A sample board lets you see the surface dry, in the room, before you decide.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Al Ain and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.