ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Polished Plaster in Bathrooms, Where It Works and Where It Does Not
14 November 2026

Polished Plaster in Bathrooms, Where It Works and Where It Does Not

A calm bathroom with seamless plaster walls, showing where polished plaster, tadelakt and microcement each belong in a bathroom

Polished plaster works in a bathroom on the dry walls, such as the wall behind a basin, a bath end away from the taps or the walls outside the shower, as long as it is waxed and the room is well ventilated. It does not belong inside a shower or anywhere water runs down the wall. Zavoré installs polished plaster in bathrooms across the UK with our own artisans, and inside the shower we install tadelakt, or microcement on a waterproofed wall, instead.

Our page on polished plaster explains the finish in full, and our Venetian plaster installation page sets out how a job runs. We install in every part of the country, and our page on Venetian plastering across the UK lists the areas. This guide is about the bathroom itself, and where each finish should stop.

  • Polished plaster suits dry bathroom walls, waxed and in a ventilated room.
  • It is not for inside a shower, a steam room or any wall that is regularly soaked.
  • Inside the shower, tadelakt or microcement on a waterproofed wall is the right choice.
  • The sealer makes microcement washable, but the wall behind a shower still needs tanking.
  • Polished finishes show every dip, so the walls must be flat first.

Where does polished plaster work in a bathroom?

Think in zones. A bathroom has wet areas, where water lands every day, and dry areas, where it only meets steam and the odd splash. Polished plaster is happy in the dry zone. The wall behind a freestanding bath, a vanity wall with a mirror, the walls around a WC and the ceiling in a well ventilated room are all good places for it. A marble effect wall behind a basin, burnished to a soft shine and waxed, can give a small bathroom real depth.

Wax protects polished plaster from splashes and makes it easier to wipe, but it does not make it waterproof. A good extractor fan and a habit of opening a window after a shower help any finish in a bathroom last.

Why can polished plaster not go inside a shower?

Venetian plaster gives a marble look, but it is not marble and it is not built to stand under running water. Daily soaking, soap and scrubbing break down the wax and then the surface itself, and a shower wall needs a finish designed for the job. That is not a weakness in the plaster, simply a question of choosing the right material for each part of the room.

What should go inside the shower instead, tadelakt or microcement?

Moroccan tadelakt is a lime plaster polished with a stone and treated with soap so the surface becomes water resistant. It has a soft, satin look and curves easily around niches and benches. It goes on a properly waterproofed wall.

For a more contemporary look, microcement is a thin cement based coating that we install on walls and floors to give seamless walls and a seamless shower floor. Its sealer makes it washable, but the wall behind a shower still needs tanking first, as it does with tadelakt. A microcement bathroom with polished plaster on the dry walls can look calm and continuous.

How should a bathroom be prepared for polished plaster?

  • Flat walls. Polished finishes show every dip, so walls are skimmed or made true where needed.
  • Plasterboard joints. On boarded walls the joints need reinforcing and the right primer, or cracks can show.
  • Tanking. Any wall in the wet zone is waterproofed before tadelakt or microcement goes on.
  • Ventilation. An extractor fan sized for the room is worth fitting before the finish.
  • Order of works. Plumbing and electrics are finished and dry before the decorative coats begin.

Can polished plaster go over bathroom tiles?

Sometimes, but it is rarely the simplest route. Tiles are sealed and glossy, so they need careful preparation and a suitable primer, and grout lines can show through a polished finish. In many cases taking the tiles off and preparing the wall properly gives a better and longer lasting result. We decide at the survey.

How is a polished plaster bathroom planned?

  1. Send photos, drawings if you have them and rough measurements, with the address.
  2. We go through them together and agree which walls are wet and which are dry.
  3. We survey the room before any price, checking the base, flatness, ventilation and waterproofing.
  4. You approve a sample in your colour, from 48 house colours or any NCS reference.
  5. Dates are agreed and the work is planned in blocks of days, so the same artisans stay until each coat is laid.

We do not publish installation prices or timescales, because they depend on what the survey finds. Plaster materials such as polished plaster and wax are sold in our shop for decorators with the right skills.

Questions about polished plaster in bathrooms

Can I have polished plaster behind a bath?

Yes, on a freestanding bath or a bath end away from the taps and shower, waxed and in a ventilated room. If a shower is fitted over the bath, that wall becomes a wet zone, and tadelakt or microcement on a waterproofed wall is the better choice there.

Is polished plaster waterproof once it is waxed?

No. Wax makes it more resistant to splashes and easier to wipe, but it does not make it waterproof. That is why it stays on dry walls and why the shower itself gets tadelakt or microcement.

How do I clean polished plaster in a bathroom?

Wipe it with a soft damp cloth and mild soap, then dry it. Avoid abrasive pads and strong cleaners, which strip the wax. A fresh coat of wax from time to time keeps it protected.

Can microcement and polished plaster sit in the same bathroom?

Yes, and they often look good together. Microcement can cover the shower and floor as seamless surfaces, while polished plaster gives the dry walls depth and a soft shine.

If you are planning a bathroom with polished plaster, send us the details. Call +44 7592 929191, Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos, rough measurements and the address. You can also order the sample board to see colours in the room.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
IT