


The easiest way to choose a polished plaster colour is to start with the room's light and use, narrow it to two or three shades from our 48 house colours, and then judge a real sample board in the room, morning and evening. Zavoré tints every batch to the sample you approve, or to any NCS reference, and installs polished plaster across the UK with our own artisans.
Our page on polished plaster explains the finish itself, and the colour library shows the house favourites. We lay the finish anywhere in the country through our service for Venetian plastering across the UK. Below we look at the three families people choose most, whites, greys and warm stones, and how to pick between them without regret.
Paint is a layer of colour on top of a wall. Polished plaster is coloured in the tub, before it is laid, so the pigment runs through every coat. As the coats are trowelled and burnished, slight differences in thickness create the cloudy movement that gives the finish its marble look. The result is a colour with depth and variation rather than a flat, single tone.
Sheen also plays a part. A highly burnished wall reflects more light, so the same tint can appear a touch richer and deeper than it does on a matt sample. When you compare samples, make sure they are in the sheen you actually want on the wall.
White is never just white in lime. Our colour library includes tints such as Calce Bianca, a clean lime white, and Ivory Veil, which carries a soft warmth. A pure white can feel crisp and gallery like in a modern flat with plenty of daylight. In an older house or a room with little sun, a white with a hint of warmth usually feels kinder and less clinical.
Whites suit hallways, stairwells and small rooms, where you want the walls to bounce light around. Because a polished finish shows every dip, a pale, high sheen wall also needs a very flat base, so the survey matters even more with whites.
They can, but they do not have to. Greys range from soft, warm tones to cooler, deeper shades. In the library, Mist Grey is light and gentle, Pietra Smoke has more weight, and Basalt and Midnight Slate move towards charcoal. A grey with a little warmth sits well with oak floors and brass, while a cooler grey pairs with white joinery, steel and glass in a contemporary space.
Deep greys and near blacks such as Vulcano Nero can look superb on a feature wall, a media wall or a dining room, where they read as rich and enveloping.
Warm stones suit a great many British homes. Tints such as Raw Silk, Oat Stone, Sand Dune and Travertine give a polished plaster wall the feel of natural stone. They suit north facing rooms that need warmth, period homes with cornices and timber, and living rooms where you want calm rather than drama.
For more colour, Terracotta, Venetian Rose and Clay Blush bring a soft Mediterranean glow, and greens such as Sage Veil, Olive Grove and Eucalyptus work beautifully in bedrooms and garden rooms. Darker earth tones like Umber and Espresso can make a library or snug feel wonderfully cosy.
Once you approve a sample, the plaster is tinted to match it. If you have a scheme from a designer, give us the NCS reference and we will match it on a sample first. Our London showroom and training centre can be visited by appointment if you want to see larger panels.
Yes, with an NCS reference. If your designer or paint supplier gives you one, we tint a sample to it so you can judge it in polished plaster, where the depth and sheen will make it read a little differently from paint. We also keep batch records, so a later order can be tinted to match the wall you already have.
Wherever you live, every job starts with photos and rough measurements, then a survey before any price, then the sample you approve before dates are set.
There are 48 house colours, from lime whites and soft greys to warm stones, earth tones, greens and near blacks. If none is quite right, we can tint to any NCS reference, matched on a sample first.
The plaster is tinted to match the approved sample, but a wall is hand laid, so the natural movement across a large area will vary a little. That variation is part of the character of polished plaster.
Pale tints such as Calce Bianca or Ivory Veil, with a gentle sheen, tend to help a small room feel lighter. A very flat wall is important, because a polished surface shows every dip.
Yes. Polished plaster and our other lime finishes are available in the shop, tinted to your approved sample.
To talk about colours for your home, call +44 7592 929191 from Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos of the room, rough measurements and the address, and we will help you shortlist shades.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.