


Yes, polished plaster suits Dubai villas very well, and it is at its most rewarding in the majlis, the double height entrance hall, the staircase and the formal dining room. Zavoré installs it in villas in every part of Dubai and anywhere in the UAE, using lime based Italian plaster in 48 house colours or any NCS reference. Two things decide the result, a flat and sound wall and a colour chosen at the real scale of the room.
This guide looks at the rooms a villa owner usually has in mind, from a majlis in Al Barsha to a tall hall in Emirates Hills or on Palm Jumeirah. For how a job is planned from first photos to the final coat, our Venetian plaster installation page sets out each stage, and Venetian plastering in Dubai explains how we work across the city.
Villas in Dubai tend to have generous rooms, tall ceilings and long runs of uninterrupted wall. In Arabian Ranches, Jumeirah Golf Estates or Dubai Hills Estate, a ground floor may open from a double height hall into a formal living room and on to a dining room. Paint on walls of that scale can look flat surprisingly quickly. Polished plaster is laid in thin coats of lime and fine marble, then burnished, so light moves through the layers and the wall seems to have depth even in a plain colour.
It also works with the materials villa interiors already use. Marble floors, timber joinery, brass fittings and heavy curtains all sit comfortably beside a burnished wall, because the plaster shares that calm, mineral quality. Venetian plaster gives a marble look but it is not marble, and that is part of its charm. It is softer and warmer, and seamless across a whole wall, with no joints or veins to line up.
The majlis is often the most important room in a villa, where guests are received and evenings run long. Seating usually lines the walls, so those walls are seen at close range for hours. A gently burnished finish in a warm stone, sand or soft grey gives the room quiet movement without anything competing with the conversation.
Think about the light fittings early. Wall washers and cove lighting make polished plaster glow, but they also pick out every dip, so the base has to be truly flat. A feature wall at the head of the room, perhaps a fireplace wall or a wall with a display niche, can take a slightly higher shine than the side walls, which keeps the room balanced.
A double height entrance hall is the first impression of the house, and it is where polished plaster has the most room to work. The challenge is scale. A wall that rises through two floors has to be laid in planned sections, with scaffolding or a tower in place, so that each coat is finished cleanly before the next begins.
Stair walls bring their own detail. The finish has to follow the line of the stair, turn neatly at each landing and meet handrail fixings, skirting and any glass balustrade without a ragged edge. Masking and careful edge work are planned in advance, because a burnished surface makes untidy junctions obvious. Where the hall also has arches or columns, the same plaster can wrap them so the space reads as one surface.
Colour on a big wall never looks quite like it does on a small sample. A pale stone that seems almost white on a card can read warmer and deeper across a tall hall, and a grey can turn cooler beside a large window. That is why we send a sample board and suggest you view it in the room itself, in the morning and again in the evening when the lamps are on.
Our 48 house colours cover the warm neutrals, stones and deeper shades most villa schemes call for, and we can also match any NCS reference from your designer. Where several rooms open into one another, it helps to choose one family of colour and vary the sheen or depth from room to room rather than switching shade at every doorway.
Not every room needs a high shine. Many owners keep polished plaster in Dubai for the hall, majlis and dining room, then use marmorino in Dubai for bedrooms, corridors and family rooms. Marmorino has a coarser marble grain and a satin sheen at most, so it feels calmer day to day and is a little more forgiving of a wall that is sound but not perfect.
Our page on polished plaster describes the finish in more depth. Bathrooms are a separate question. Venetian plaster is fine on a dry bathroom wall but not inside a shower, where tadelakt or microcement on a waterproofed wall is the right answer.
At the survey we talk through the building, the climate and how each room is used. Villas in Dubai are air conditioned, and we plan around that along with furniture, other trades and access. Most communities have management rules on working hours and deliveries, so check with yours, and if you rent, ask your landlord first.
There is no fixed figure, because the price depends on the area of wall, the state of the base, access at height and the finish chosen. We look at your photos and measurements, survey the walls and only then give a price, so you know exactly what is included.
Yes, in most cases. Plasterboard joints need reinforcing and the right primer, and the board must be firmly fixed and flat. If a wall has been patched many times or is out of line, it may need skimming first, and we say so at the survey.
Yes. In a modern villa a pale, lightly burnished wall gives a seamless, gallery like calm, while in a classical interior a deeper colour with a higher shine sits well with cornice, columns and panelled doors. The finish adapts to the scheme rather than dictating it.
Keep it out of showers and steam rooms, and away from the wall directly behind a hob. Elsewhere in the villa, including dry bathroom walls, it works well. For wet areas we suggest tadelakt or microcement on a properly waterproofed wall.
To talk about your villa, call +44 7592 929191, Monday to Saturday from 9am to 6pm UK time, or email sales@zavore.co.uk with photos of the rooms, rough measurements and the address. A sample board is the easiest way to begin choosing colour.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.