


Polished plaster in Nottingham is a lime and marble finish that Zavoré lays by hand for homes and businesses across the city, from Victorian villas and red brick terraces to warehouse flats and new build apartments. It is built up in thin coats and burnished until the wall carries a soft, stone like sheen, and every job starts with photos and a survey of your walls.
If you want the background first, our page on polished plaster finishes explains how the material is made and where it suits. For the wider picture of what we do locally, see Venetian plastering in Nottingham, which covers the full range of lime finishes our artisans lay in the city.
Polished plaster is slaked lime mixed with finely ground marble. It goes on with a steel trowel in several very thin layers, and the final passes are pressed hard so the surface closes up and reflects. The result reads like polished stone, though it is plaster and not marble.
Nottingham has a lot of the rooms this finish was made for. Tall Victorian hallways, generous stairwells in large villas, Georgian townhouses near the old centre and converted lace warehouses with long, uninterrupted walls all give a burnish room to show off. Newer suburbs and city centre apartments offer plasterboard walls, which take polished plaster well once they are prepared properly.
Some rooms reward a reflective wall more than others. These are the places we would usually suggest when someone in Nottingham asks where to start.
Bathroom walls away from direct water are fine once the plaster is waxed. Inside a shower enclosure we would not use it. That is a job for tadelakt, or microcement on a properly waterproofed wall.
Preparation decides how the finished wall looks. Older houses in the city often carry a century of patching, rewiring channels and blocked chimney breasts, and a glossy finish will reveal each one. On the survey we tell you plainly if a wall needs skimming, boarding or a damp issue sorting before anything decorative goes on.
Plasterboard in new builds and apartments is usually simpler. The joints need reinforcing and the right primer must go on, and then the base coats can follow. Timber partitions that flex, or loose lath and plaster, are less suitable for a hard burnish, and there we might suggest marmorino, which has a softer, more forgiving surface.
Cold cellars and basements are another case. Lime needs a calm, steady room to cure, so a damp space below ground has to be dealt with before any finish is laid.
The steps are the same whether it is one feature wall or a whole ground floor, and they are set out in full on our Venetian plaster installation page.
Each wall is finished in one session, because the burnish has a short working window. Timings depend on the rooms and the walls, so we set them at the survey rather than guessing in advance.
When you search for polished plaster near me in Nottingham, look for a team that surveys before pricing, shows you a sample on a board and explains what the wall needs underneath. Zavoré installs across the East Midlands and the rest of the country, and our page on Venetian plastering across the UK lists the towns and cities we cover. There is also a dedicated page for polished plaster in Nottingham with more on local walls.
If you would rather use a decorator you already trust, plaster materials are sold in our shop. We also teach the craft in person at our Birmingham Academy and our London and Manchester centres.
It depends on the area, the condition of the walls, the height of the room and the finish you choose. A hallway that needs skimming first is a different job from a flat new wall. We look at photos and survey the walls, then give a clear price once we know exactly what is involved.
Usually yes, as long as the existing plaster is sound and flat enough. Lime based polished plaster suits solid brick because it breathes rather than trapping moisture behind a film. If the wall is patched or uneven, we will recommend skimming or a softer finish such as marmorino instead.
Polished plaster is the name usually given to the glossy, burnished end of Venetian plaster. It is the same lime and marble material, worked harder in the final coats so it reflects more light. Marmorino and travertino sit at the matt and textured end of the same family.
Start with our 48 house colours or bring any NCS reference you like. A sample board in the shade lets you see it at home through the day, which matters because a burnished surface changes as the light moves.
To talk about polished plaster for your Nottingham home or business, call +44 7592 929191 or email sales@zavore.co.uk with photos, rough measurements and the address, and we will tell you what your walls need.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.