ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Polished Plaster on Plasterboard, Preparing the Wall
14 November 2026

Polished Plaster on Plasterboard, Preparing the Wall

A close view of a decorative textured plaster wall, a reminder of the flat, even base polished plaster on plasterboard needs

Yes, polished plaster can go on plasterboard, and many of the cleanest polished walls in new homes and apartments are laid on it. The board must be firmly fixed, the joints reinforced, the whole wall flat and the right primer applied, because a burnished surface shows every joint, screw head and dip beneath it. Zavoré installs polished plaster on plasterboard across London and the UK with our own artisans, and the survey decides what preparation each wall needs.

Our polished plaster page describes the finish, and Venetian plastering across the UK lists the places we install it. This guide covers what happens to a plasterboard wall before the first decorative coat goes on.

  • Boards must be fixed securely so the wall does not flex or move.
  • Joints need reinforcing, or they can crack and show through the polish.
  • The wall must be flat, because polished finishes show every dip.
  • The right primer gives the lime coats an even, well bonded base.
  • Bathroom walls near water need a different finish inside the shower.

Why does plasterboard need special preparation?

Plasterboard is quick, light and flat, which is why it lines so many modern homes, extensions, loft rooms and apartments. Its weak points are the joints between boards and the fixings that hold them. Boards can move slightly as a building settles, as timber studs dry out or as rooms warm and cool. On a painted wall a fine crack at a joint is easy to fill. On a burnished lime wall it is visible across the room.

The board face also absorbs moisture differently from the taped joints and filled screw heads. Without the right primer, the first lime coat can dry unevenly over those patches, and the difference may show as shadowing in the final finish.

How do you check plasterboard is ready for polished plaster?

These are the things we look at during the survey, and the things worth asking your builder about if the walls are new.

  • Fixings. Boards should be firm when pressed, with no movement or hollow sound between studs.
  • Joints. Every joint should be taped and filled, with no ridges or open seams.
  • Flatness. A long straight edge laid across the wall shows bows and hollows quickly.
  • Corners. External corners need beads or a crisp edge, because the trowel follows whatever is there.
  • Damage. Torn paper facing, dents and loose patches need repair before priming.
  • Moisture. New boards and fillers must be completely dry.

Should plasterboard be skimmed before polished plaster?

Often it is the simplest route to a perfect base. A skim coat over the whole board hides joints and screw heads under one continuous surface and corrects small variations in level. Once it is completely dry and primed, it gives the polished coats nothing to reveal.

Where boards have been very carefully jointed and filled and the wall is already flat, a skim may not be needed, and the right primer alone can be enough. We would rather tell you honestly at the survey than lay a beautiful finish over a weak base. Our Venetian plaster installation page explains how preparation fits into the rest of the job.

What primer goes on plasterboard before polished plaster?

The primer does two jobs. It evens out the suction across board, joints and filler, and it gives the first lime coat something to grip. Using the right primer for the base and the finish is one of the quiet steps that decides how the wall looks years later. We supply a primer with our plaster materials, and the choice depends on what the survey finds.

Can polished plaster go on plasterboard in a bathroom?

On the dry walls of a bathroom, such as behind a basin or around a window, polished plaster on suitable board can work well. It is not for inside showers. Venetian plaster in any form does not belong where water runs down the wall every day. For a shower, tadelakt or microcement on a waterproofed wall is the right answer. The sealer makes microcement washable, but the wall behind a shower still needs tanking.

How does a plasterboard job run?

  1. Send photos, drawings and rough measurements, and tell us if the walls are new board, old board or a mix.
  2. We survey before any price, judging the fixings, joints, flatness and how each room is used.
  3. A sample is made in your colour, from 48 house colours or any NCS reference.
  4. Once sample and price are approved, the plaster is tinted to match and dates are set.
  5. Work is planned in blocks of days so the same artisans stay on the job, from preparation to the final burnish and wax.

Questions about polished plaster on plasterboard

Will the joints in plasterboard crack through polished plaster?

They can if the board moves or the joints were not reinforced. Firm fixings, properly taped and filled joints, the right primer and sometimes a full skim coat are the ways to prevent it. That is why the survey looks closely at the board before any price.

Can I use lime based polished plaster on plasterboard?

Yes. Lime polished plaster goes on plasterboard regularly, provided the board is prepared and primed correctly. Lime breathes, while acrylic forms a film, and both can sit on board once the base is right. We talk through which suits your room at the survey.

How flat does plasterboard need to be?

Flat enough that a long straight edge shows no obvious bows or hollows. Polished finishes show every dip, so walls that look fine under paint may still need work. If in doubt, a skim coat gives the most reliable result.

Can I prepare the plasterboard and buy the plaster myself?

Yes. Plaster materials and primer are sold in our shop, tinted to your approved sample. If you want to learn the craft properly, our in person courses run at the Zavoré Academy in Birmingham and our London and Manchester centres.

To ask about a plasterboard wall, call +44 7592 929191, Monday to Saturday, 9am to 6pm, or email sales@zavore.co.uk with photos, rough measurements and the address. The sample board is a good way to choose a colour while the walls are prepared.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
IT