


Burnished, soaped lime for showers with no grout lines. We install tadelakt across Sohar and anywhere in Oman.
A shower with no grout, no silicone and no tile edges, just one smooth, softly shining lime surface, is what tadelakt in Sohar can give a home. Zavoré supplies tadelakt with the soap that finishes it, installs it and teaches it. We install tadelakt in villas, apartments and spas across Sohar, and anywhere in Oman. To make a start, email photos of the bathroom, its rough size and the address.
A family villa in Sohar usually has a bathroom for almost every bedroom, plus a guest washroom near the majlis and often a wash area by the kitchen. Many were tiled when the house was built, and after years of coastal humidity the grout lines are where the trouble shows. The newer villas going up inland and the apartment blocks near the port and freezone tend to have compact shower rooms, while older homes near the corniche have larger, squarer bathrooms with solid rendered walls.
Tadelakt suits all of them because it is applied, not laid, so it follows curves, niches and benches as one surface. It is Moroccan lime plaster with fine limestone in it, compressed with a smooth stone while it sets and then worked with olive oil soap. The soap reacts with the lime to leave a water repellent skin, with no film or sealer on top.
Our tadelakt belongs in showers and wet rooms, around a freestanding bath, on vanity walls, in hammams and steam areas, and on curved washbasins and niches. In commercial spaces it suits hotel bathrooms, spa treatment rooms and the washrooms of restaurants that want something warmer than tile. Colours are lime fast earth pigments, such as clay reds, ochres, olive greens, plaster pinks, off whites and charcoals.
A few limits keep it honest. Tadelakt is a finish, not a waterproofing system, so the wall behind a shower is still tanked. It wants a mineral, stable base such as a sand and cement render, and plasterboard on its own is not enough in a wet area. It is wrong for a floor with heavy traffic and it dislikes acid cleaners, so limescale sprays are out. The surface is wiped dry and re soaped from time to time.
Send photos, drawings and rough measurements of the room. We survey before any price, checking the base and the tanking. A sample in your chosen colour is approved next, and the tadelakt is tinted to that sample before it ships. Dates come once the sample and price are agreed. The work runs in blocks of days so the same artisans lay both coats, burnish with the stone at the right moment and soap the surface. Panels burnished on different days carry slight variation, which is part of the character. The tadelakt installation page explains the sequence, and at the survey we talk through the climate, the building and how the room is used.
Trade buyers and fit out firms in Sohar can order the material alone. Tadelakt and its soap are supplied from the UK, tinted to the approved sample and sent on a tracked service to your address. Delivery costs are quoted by email, and any import duty is set by Oman and paid by the buyer. See the shop, and begin with a sample board.
Burnishing has a short window, so it is a craft worth learning in person. The tadelakt course is taught at our UK training centres in Birmingham, London and Manchester, where you work the stone and soap with your own hands. Students arrive from abroad, and we can organise a pickup from the airport or station alongside the booking.
Outside the shower, other finishes take over. For seamless bathroom floors there is microcement in Sohar, which we install. Dry bathroom walls and halls suit polished plaster in Sohar or marmorino in Sohar. Bedrooms can be softened with limewash in Sohar or clay plaster in Sohar. For a modern edge look at concrete effect plaster in Sohar or liquid metal in Sohar. The full range is on our decorative finishes specialist in Sohar page, and there is more on Venetian plastering in Sohar and Venetian plastering in Oman.
Yes. We install tadelakt throughout Sohar and in every other part of Oman, from a single shower to a full spa. Email photos and rough measurements to start.
Often, yes. The tiles come off, the wall is rendered and tanked, and the tadelakt is laid over a sound mineral base. We check what is behind the tiles at the survey.
It is water repellent thanks to the burnishing and the soap, but in a shower it still goes over a tanked wall, because it is a finish rather than a waterproofing system.
Wipe it dry after use and avoid acid or limescale cleaners. Re soaping the surface now and then keeps it in good order.
Call +44 7592 929191 any day from Monday to Saturday, 9am to 6pm UK time, or email sales@zavore.co.uk with photos of the bathroom, rough measurements and the address. Order a sample board to feel the burnished surface.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Sohar and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.