


Repairing polished plaster is usually possible, and small chips, scuffs and fine cracks can often be mended so they almost disappear. Zavoré repairs and installs polished plaster with our own artisans in London, Birmingham, Manchester and across the UK. The key is finding out why the damage happened first, because a patch over a moving crack or a damp wall will simply fail again.
Our page on polished plaster explains how the finish is built, which helps make sense of how it is repaired. To see the areas we cover, visit our page on Venetian plastering across the UK.
Polished plaster is a thin, hard decorative skin. It copes well with daily life, but it still reacts to knocks and to whatever is happening in the wall behind it. Common causes include these.
Many marks that look like damage sit only on the protective top layer. On a waxed wall, a soft cloth and a little patience often remove scuffs. If the wax itself is worn, a fresh thin coat can restore the sheen across the area. Avoid strong cleaners, abrasive pads and anything solvent based unless you know the finish will accept it, because these can dull or stain the surface.
Where a scuff has broken through the wax into the plaster, it becomes a small repair rather than a clean. That is the point to stop and ask for advice.
A chip is a small missing piece of the finish, often on a corner or at the height of a door handle. The usual approach is to clean the edges, fill the hollow with plaster tinted to match, let it dry, then work fine coats over it and burnish it so the sheen blends with the surrounding surface. On external corners, a little extra build may be needed to rebuild the edge cleanly.
Colour is the hard part. Polished plaster has a layered, cloudy look, so a patch must match not only the shade but also the movement in the surface. Knowing the original colour reference helps a great deal. We hold 48 house colours and can work to any NCS reference, and a sample board can help confirm a match before any work begins.
Cracks are the most important thing to understand properly. A fine straight line along a plasterboard joint often means the joint was not reinforced or primed correctly. A crack running diagonally from the corner of a door or window can point to movement in the building. A network of fine lines may come from a backing coat that dried too quickly or a surface applied too thickly.
Filling a crack without addressing its cause usually means it returns. In some cases the fix is to cut out and reinforce the joint, let the structure settle, or cure a damp problem first, and only then refinish the area. On solid masonry, keeping to a breathable lime based system matters, since acrylic forms a film that can trap moisture behind it.
If you are in London, Birmingham, Manchester or anywhere else in the UK, start by sending clear photos of the damage, one close up and one showing the whole wall, with rough measurements of the area. We will tell you what the pictures suggest. For anything beyond a minor mark, we survey before giving a price, looking at the substrate, flatness, cracks, damp and how the room is used.
After the survey we explain whether a local repair will blend or whether the wall would look better recoated from corner to corner. If you agree, we prepare a sample, set dates and plan the work in blocks of days. Our page on Venetian plaster installation covers how the finishing coats are laid.
Sometimes a patch is visible no matter how carefully it is done, particularly on a large, evenly lit wall with a high shine. If a wall has several repairs, a stain that has come through, or a finish that has been painted over in places, recoating the full wall gives a calmer, more honest result. It is also an opportunity to choose a different colour, or to switch to marmorino, limewash or travertino if your taste has changed.
Wet areas deserve a mention. Venetian plaster should not be used inside a shower, so damage there is a sign the finish was in the wrong place. Tadelakt or microcement over a properly waterproofed wall suits a shower better, and we install both. Decorators who want to learn repairs can join our in person courses in Birmingham, London or Manchester, and plaster materials are sold in our shop.
Often yes. Small chips can usually be filled with tinted plaster and burnished so they blend with the surrounding sheen. How invisible the repair looks depends on the colour match, the light in the room and how high the polish is, so we judge each case from photos and a survey.
Common reasons include movement in the building, unreinforced plasterboard joints, the wrong primer, damp, or a backing coat that dried too fast. The pattern of the crack is a clue. Finding the cause matters more than the filler, otherwise the crack tends to come back.
Try a soft dry cloth first, then a lightly damp one. On waxed walls a fresh thin coat of wax can restore the surface. Avoid harsh cleaners and scouring pads. If the mark has gone through into the plaster, ask for advice before trying anything stronger.
It depends on the extent of the damage, the cause, access and whether a local repair or a full recoat is the right answer. Send photos and rough measurements, and we will explain what we think is involved before arranging a survey and price.
For help with a damaged wall, call +44 7592 929191 or send photos, rough measurements and the address to sales@zavore.co.uk. We will come back with an honest view of what the repair needs.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.