


Venetian plastering in Yorkshire covers everything from thick stone farmhouses in the Dales to Georgian rooms in York, mill conversions in West Yorkshire and new apartments in Leeds and Sheffield. Zavoré provides Venetian plastering across the county with our own artisans, choosing a lime based finish that suits each building and tinting it to a sample the homeowner has approved.
Our page on Venetian plaster installation explains what we lay and how a site is run. For the county itself, read about Venetian plastering in Yorkshire, which sets out the finishes we suggest for local property types.
Venetian plaster is a fine lime plaster laid in several thin coats with a steel trowel, then compressed and waxed. At its glossiest it is known as polished plaster, and in softer versions it gives a stony, gently clouded surface. It brings the look of marble to a wall, although it remains plaster and should be described honestly as such.
For a Yorkshire homeowner, the important point is that the finish has to suit the wall underneath. A cottage built from gritstone behaves nothing like a new flat lined with plasterboard. Getting that match right is what keeps the surface sound and good looking for years.
The county's buildings are wonderfully varied. In the west, the Pennines and the Dales are built from gritstone and limestone with thick walls. In the east, the Wolds and the Vale of York lean towards brick and red pantiles. York has its Georgian streets, Leeds and Bradford have warehouses, arcades and mill villages, Sheffield has Victorian stone villas on its hills, and Hull has a Georgian old town. Between them sit market towns, spa towns such as Harrogate and Ilkley, and coastal resorts with Victorian terraces.
Layers are thin and each one needs drying time. Cold, damp rooms slow that down, so keeping the heating on gently helps. That is one reason we set timescales at the survey rather than quoting weeks in advance. Larger houses, or several rooms at once, can be grouped into one planned block so the team stays through each stage.
Older Yorkshire houses often have lime plaster on solid masonry. Lime breathes and suits these walls, while acrylic forms a film that can hold moisture where it is not wanted. If a past repair used cement or a sealed paint, it may need to come off so the wall can dry out and the new coat can bond. Polished finishes show every dip, so uneven stone walls are usually better in a softer, lower sheen finish.
Converted mills and new builds bring plasterboard and blockwork. Board joints need reinforcing and the surface needs the right primer, otherwise hairline cracks can reach the finish. Lime is caustic when wet, so rooms are protected and kept clear while we work. For listed buildings, consent is generally needed for works that affect character, so check with your local planning authority before booking.
Zavoré installs throughout Yorkshire, from the cities to the Dales, Moors and coast, and in London, Surrey, Birmingham, Manchester and the rest of the country. The full list of places is on Venetian plastering across the UK. Learn more about the material on our Venetian plaster page.
If your decorator would rather do the work, plaster materials can be bought in our shop. Training is in person at our Birmingham Academy and our London and Manchester centres, with a Beginner Course of 3 days, an Advanced Course of 4 days and 1 to 1 Training of 3 days, all materials included. You can also book a visit to our London showroom and training centre.
The price depends on the wall area, the condition of the surface, the finish and access. We do not quote from a description alone. Send photos and rough measurements and we arrange a survey, after which you get a clear figure with any preparation shown separately.
Yes, usually as a breathable lime finish such as marmorino or limewash. Stone walls are rarely flat, so a soft sheen suits them better than a high polish. We check for damp and loose material first and explain anything that needs fixing.
On bathroom walls away from direct water, it can be. Inside a shower we recommend tadelakt or microcement on a waterproofed wall instead, because Venetian plaster is not made for running water. We talk through the layout at the survey.
Yes. Choose from 48 house colours or give us any NCS reference. You approve a sample before work begins, and the plaster for your rooms is tinted to that sample.
To start, email photos and rough measurements to sales@zavore.co.uk or call +44 7592 929191. A sample board lets you see the colours in daylight at home.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.