ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/What Is Venetian Plaster? A Complete UK Guide
14 August 2026

What Is Venetian Plaster? A Complete UK Guide

Close view of a dark textured plaster wall with soft clouded depth, what Venetian plaster is and how it is made

Venetian plaster is one of the oldest wall finishes still in daily use, and one of the most misunderstood. This guide explains what the material actually is, where it belongs in a home or a commercial space, and how to tell the real thing from the many paint effects sold under its name.

Key points

  • Venetian plaster is lime putty, marble dust and pigment, laid in thin coats with a steel trowel and burnished until it shines. It gives a marble look, but it is not marble.
  • Venetian plaster walls suit living rooms, bedrooms, halls, stairwells and feature walls. It is not used inside showers, where tadelakt or microcement on a waterproofed wall is the right choice.
  • Real lime plaster breathes. Acrylic products sold as Venetian plaster paint form a film on the wall.
  • Colour is tinted through the material before it ships, in 48 house colours or any NCS colour.
  • Zavoré was established in 2021 and supplies, installs and teaches Venetian plaster across the UK.

Venetian plaster is what Zavoré supplies, installs and teaches, and our own team provides Venetian plaster installation across the UK.

What it is

Traditional Venetian plaster is slaked lime putty blended with finely ground marble dust and pigment. There is no plastic binder doing the work. The material is applied in thin coats with a steel trowel, compressed and burnished until the surface tightens into stone. The shine of a polished plaster wall is not a varnish sitting on top; it is the material itself, closed and polished by the steel.

Because the finish is mineral, it behaves like stone. It is breathable, so walls can release moisture rather than trap it. It hardens over time as the lime slowly carbonates. And it ages the way stone ages, developing character rather than peeling.

The family of finishes

Venetian plaster is a family rather than a single product. Marmorino gives a soft, honed stone surface with a matte or satin sheen. Grassello, often sold in Britain as polished plaster, is the mirror finish: burnished until it throws light. Tadelakt is the Moroccan branch of the same craft, sealed with olive soap until it sheds water, which is why it belongs in bathrooms and wet rooms. Microcement is the modern cousin: not a lime product, but a seamless cementitious coating that suits floors and hard working contemporary spaces.

Venetian plaster is itself one branch of a wider family. Our guide to decorative plaster covers the rest, from limewash and clay to metallics and sculpted rock. You can see the plasters themselves in our plasters collection.

Where it belongs

Lime plasters suit living rooms, bedrooms, halls, stairwells and feature walls: anywhere the wall is seen in changing light. Tadelakt and sealed systems take the wet rooms. For commercial floors and high traffic surfaces, a modern finish is often the honest recommendation, and a good supplier will tell you which your wall wants rather than sell you the romantic answer.

Venetian plaster walls, where they work

Venetian plaster walls work wherever a wall is seen up close and in changing light through the day. A chimney breast, a long hall, a stairwell, or a single feature wall behind a bed or a sofa are the places people ask about most. Because the finish is laid by hand, no two walls are quite alike, and that gentle movement in the surface is the reason people choose it over paint.

Venetian plaster for walls also works in kitchens, on walls away from the hob and the sink, and in bathrooms outside the shower itself. Inside a shower a lime plaster wall is not the right answer. That is where tadelakt or microcement on a properly waterproofed wall belongs. The same Venetian wall plaster can be carried up onto a ceiling too, as our guide to Venetian plaster ceilings explains. For ideas for each room of the house, read Venetian plaster walls room by room.

Is a Venetian plaster wall marble?

No. A Venetian plaster wall gives a marble look, and well laid work can be mistaken for stone, but it is a lime plaster with marble dust in it, not a slab of marble. That is part of its appeal. It follows corners, curves and alcoves as one continuous surface, with none of the joints you would see between stone slabs. And because it is thin coats of lime rather than heavy stone, it can go onto ordinary walls in an ordinary home, from a flat in the city to a house in the country.

Venetian plaster for walls: how Venetian plastering is done

On a wall, Venetian plastering follows the same basic order.

  1. Prepare the wall. The background must be sound, flat and primed. These finishes go on thin, so they follow whatever is underneath rather than hide it. Uneven or hollow walls need making good first.
  2. Lay the coats. Most finishes go on in two thin coats with a steel trowel.
  3. Compress and burnish. The trowel is worked over the surface until it tightens. How far this goes decides the look, from the soft sheen of Marmorino to the mirror finish of Grassello.
  4. Protect it. Nothing goes over the finish but a wax or a sealer.

Venetian plaster vs Venetian plaster paint

Many paint effects are sold under the Venetian plaster name, and some of them are acrylic products made to imitate the look. Real Venetian plaster is lime putty and marble dust, laid with a steel trowel and burnished, so the sheen comes from the material itself rather than from a coating on top. The simplest check is the label, as the next section explains.

How to spot the real thing

Ask what is in the tub. A true lime plaster lists lime and marble, not acrylic copolymer. Ask how the colour goes in: quality suppliers tint the material through the whole tub before it ships, so a scratch or a chip shows the same colour underneath. And ask to see a hand trowelled sample board in the room before you commit; a photograph flattens exactly the qualities you are paying for.

Lime or acrylic Venetian plasters

Venetian plasters fall into two broad groups. Lime plasters, such as Marmorino and Grassello, are mineral. They breathe, so moisture in the wall can pass through rather than sit behind the finish, and they harden slowly as the lime carbonates. Acrylic plasters use a plastic binder and form a film on the surface. The two can look alike on the day they are finished, but they behave differently over time and they are repaired differently.

If a product is described as Venetian plaster paint, it is usually in the acrylic group. That does not make it a bad product, but it is a different one, and it is worth knowing which you are buying. Our guide to lime or acrylic Venetian plaster sets out the differences in full.

Colours for Venetian plaster walls

Colour is tinted into the material before it ships, so it runs right through the plaster rather than sitting on top. Zavoré offers 48 house colours, or we can match any NCS reference. The trowel and the burnish change how a colour reads, so a shade that looks flat on a chart can come alive on the wall. Always judge a colour on a sample board in the room itself, by day and in the evening.

How much does Venetian plaster cost

There are two costs to think about, the material and the labour. Material prices are listed openly in our Venetian plaster shop. As a guide, Veneziano Plaster is £200 for a 24kg tub and Veneziano Metallico is £175 for 20kg, with primers, waxes and sealers priced alongside.

Installation is priced after a survey, because the cost depends on the walls, their condition, the finish you choose and how much preparation is needed. A sample is made and approved before any work starts, and our artisans then work in blocks of days so the job runs straight through. To arrange a survey, call +44 7592 929191 or email sales@zavore.co.uk.

What it costs and how much you need

As a working guide, a 20kg tub of Marmorino covers about nine square metres in two coats over primer. Materials are a modest part of a decorative wall; the greater part is the hand that applies it, which is why the same tub can produce an ordinary wall or an extraordinary one.

If you are weighing a project, order sample boards first, in your own tints. If you would rather learn the trowel yourself, our Academy courses run at six benches so the tutors can focus on each student. And if you want it done for you, our own team surveys, specifies and installs across the UK, including London, Birmingham, Manchester and Surrey.

Before you hire anyone, our guide on how to choose a Venetian plaster installer sets out the questions to ask. To see what the work involves on a very large scale, read inside a grand ballroom.

Learning Venetian plastering

If you want to lay it yourself, or add it to your trade, the Zavoré Academy teaches Venetian plastering in Birmingham, with centres in London and Manchester, and every course runs at all three. The Beginner course lasts 3 days, the Advanced course 4 days, and 1 to 1 Training 3 days, with materials included in each. See our Venetian plastering courses for details, or read how to apply Venetian plaster for an overview of the method.

If the word stucco confuses you, read stucco vs Venetian plaster and what the word means.

Questions about Venetian plaster

What is Venetian plaster?

Venetian plaster is a decorative wall finish made from slaked lime putty, marble dust and pigment. It is laid in thin coats with a steel trowel and burnished until the surface tightens and takes on a soft sheen or a high polish.

What is Venetian plastering?

Venetian plastering is the craft of laying that finish. The wall is prepared and primed, two thin coats go on with a steel trowel, the surface is compressed and burnished, and it is protected with a wax or a sealer.

What is Venetian plaster paint?

It is usually an acrylic product made to imitate the look of Venetian plaster. It forms a film on the wall, while real lime Venetian plaster breathes and takes its sheen from the material itself.

Can Venetian plaster go in a shower?

No. Inside a shower, use tadelakt or microcement on a waterproofed wall. Venetian plaster suits the rest of the room, away from running water.

Is Venetian plaster real marble?

No. It gives a marble look because it contains marble dust and is burnished like stone, but it is a lime plaster, not a slab of marble.

Does Zavoré install Venetian plaster?

Yes. Our own artisans carry out Venetian plaster installation across the UK. Every job starts with a survey and a sample you approve, and you can call +44 7592 929191 or email sales@zavore.co.uk to begin.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
NL