


Moroccan lime plaster, burnished with a stone and soaped, so a shower needs no grout and no sealer. Made for small, awkward Bath bathrooms with curves and niches.
Tadelakt in Bath is Moroccan lime plaster, burnished with a stone and then soaped, which makes it water resistant without a film or sealer on top. Zavoré installs tadelakt through our own applicators, and we are based in Birmingham, where our Academy is. The city took its name from its hot springs and has bathed for two thousand years, so a lime bathroom feels at home here. Order a sample board to see the burnished surface.
Most Bath bathrooms were not planned. A Georgian townhouse had none, so one was fitted into a closet, a dressing room or a corner of a landing, and later a second into the attic. The result is a room with sloping ceilings, thick stone walls, uneven corners and a window in the wrong place.
Tiles struggle with that. Tadelakt does not mind. It runs into a niche, over a bench, round a reveal and into the curve of a chimney breast as one surface, with no grout to blacken and no silicone to peel. Curves are easier for it than flat runs, so an old room with no right angles is a good candidate.
The same suits the guest houses and small hotels in Bath terraces, where an en suite is carved out of a bedroom and has to look generous. Because the finish is lime, it also goes comfortably on the walls beside it in the same room.
Tadelakt is a finish, not a waterproofing system on its own. In a shower the wall behind must be tanked and the base right. Lime or sand and cement render makes an ideal bed. Plasterboard needs tanking and a suitable rendered base built up over it, and a modern skim is a poor foundation that we would not work over in a shower.
Thick Bath stone walls hold damp if the house has a defect, and some basement bathrooms run cold and wet. We say plainly if damp must be fixed first. Corners are formed radiused, because a stone cannot burnish into a sharp right angle.
There is a cost in craft. The burnishing window is short, the stone work is physical, and the finish is priced as labour rather than material. Two panels burnished on different days will not match exactly. If you want a uniform surface, choose another finish.
Our tadelakt finishes belong in wet and damp rooms.
It is the wrong choice for a floor with heavy traffic, and for anywhere sharp edges and straight lines are the point. It does not like acids, so limescale spray is out. Bath water is hard, so wipe dry rather than letting scale build up.
We survey before pricing. Substrate, flatness, cracks, damp, movement, access and protection all matter, and small questions can often be answered from photos. The sample board shows the stone burnished and soaped. Colour comes from lime fast pigments, so expect clay reds, ochres, olive greens, plaster pinks, off whites and charcoals. Material is tinted to your approved sample before it ships.
Bath is some way from our Birmingham base, so work is planned in blocks of days. The team stays on the job so each coat is laid in order and burnished at the right point of set. Dates are agreed once the sample and price are signed off. See the tadelakt installation page.
The shop sells tadelakt in tubs with the soap that finishes it, with tracked UK delivery, and trade accounts are on the trade page. It is the hardest finish we stock, and a shower not closed properly will wet through. To learn it, the tadelakt course runs at our training centres in Birmingham, London and Manchester.
Another wet room option is microcement in Bath. For dry rooms there are polished plaster in Bath, marmorino in Bath, clay plaster in Bath and limewash in Bath. Modern looks are concrete effect plaster in Bath and liquid metal in Bath. The whole range sits under a decorative finishes specialist in Bath, and the classic family is Venetian plastering in Bath.
It is water resistant, formed by burnishing and soap reacting with the lime. The wall behind must still be tanked and the base right. Done properly it copes with daily water.
Not on its own in a wet area. Plasterboard needs tanking and a suitable rendered base built over it. We would not lay it over a modern skim in a shower.
Use mild soap and wipe dry, with occasional re soaping. Avoid acids such as limescale sprays, which damage the surface.
Often very well. It follows slopes, niches and curves without joins. We check the structure and any damp when we survey.
To talk it through, call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and the postcode. The sample board is the place to start.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Bath and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.