


Venetian plaster for office receptions and boardrooms gives a workplace a calm, considered first impression that paint rarely matches. Zavoré installs lime based Venetian plaster in offices across London, Birmingham, Manchester and the UK, using our own artisans, and we plan each job around how the building is used, how hard the walls will be worked and when the space can be handed over.
Our guide to Venetian plaster explains the material and its finishes, and our page on Venetian plastering across the UK lists the areas we cover.
A reception is the one room every guest, candidate and client passes through. Venetian plaster gives it the soft, layered depth of stone, with a marble look that is not marble, and it does so on a single seamless surface without joints or panels. Because the colour is built up in thin coats of tinted lime, even a quiet pale grey has movement in it. Behind a reception desk, along a lift lobby or around a seating area, that depth reads as care and quality without shouting.
Practically, lime plaster cures hard. Small scuffs and knocks, which are inevitable where people carry bags and move furniture, can usually be filled and polished back locally by an artisan rather than redecorating the whole wall.
Boardrooms are about concentration and long meetings, so many people choose a softer look than in reception. A satin polish or a fine marmorino keeps reflections low on a screen wall and around a long table. Travertino gives the layered feel of cut stone, and a concrete effect suits a pared back modern office. Where the brief calls for drama, a deep, high gloss polished plaster on a single end wall can carry the room. We show the options on samples so you can compare them in the actual light of the space.
A company name or logo can be sculpted by hand in bas relief, rising slightly from the wall and finished in natural white, painted or set within a Venetian plaster surround. Lighting can be planned into the relief from the start, with LED strips concealed behind its edges and every connection made by a qualified electrician. Low angled light across a relief shows off its shape beautifully. Because it is carved rather than cast, each piece is unique to the building.
Offices bring their own practical questions, and we raise them at the survey.
Our Venetian plaster installation page covers how the coats are laid and cured.
Whether your office is a converted Victorian warehouse, a Georgian townhouse turned into workspace or a modern tower floor, the process is the same. Send photos, drawings and rough measurements. We survey before giving a price, you approve a sample, and then the work is booked as a block of days so the same artisans carry it through. We do not quote timescales in weeks or prices before the survey, because the walls, the details and the access all change the job.
Most office walls are plasterboard on metal studs. Venetian plaster sits well on it if the joints are taped and reinforced, screw heads are set and filled, and the correct primer goes on before any lime. A polished surface shows every dip, so flat boards matter. Older solid walls in period buildings suit lime well, as lime breathes with masonry, but loose or hollow plaster needs cutting out first. Where washrooms are part of the fit out, Venetian plaster stays outside the shower or wet zone; inside it, tadelakt or microcement over a waterproofed and tanked wall is the right choice, and we install microcement.
Lime Venetian plaster cures hard and copes well with everyday use. The real advantage is repair. A knock or scuff can usually be filled and polished locally by an artisan, rather than repainting or replacing a whole wall.
Yes. A logo or lettering can be sculpted by hand in bas relief, drawn to scale first so you can approve it. It can be left white, painted, or framed by a Venetian plaster finish, with lighting planned in.
We talk through access and working hours at the survey. Most buildings have their own management rules, so we agree times with you and the building before booking dates.
Yes. Choose from 48 house colours or give us any NCS reference, and we will make a sample board to approve before work starts.
Planning a reception or boardroom? Send photos, plans and rough measurements to sales@zavore.co.uk or call +44 7592 929191, and we will talk through finishes and access. A sample board helps the whole team agree on colour.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.