ZAVORÉ
ZAVORÉ
✦
Where Artistry Begins
Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·Tracked delivery across the UK and worldwide·Same day and 24 hour delivery available·Venetian plaster tinted to your exact colour·Damaged in transit? We’ll replace it within 24 hours or on the same day·Speak to a specialist · 07592 929191·Residential and commercial projects installed by our own team·Trade accounts · 10% and rewards·Training courses at our studio·Showroom · visit by appointment·
Home/The Journal/Chelsea Bathrooms Without Grout, Planning a Seamless Room
13 November 2026

Chelsea Bathrooms Without Grout, Planning a Seamless Room

A modern bathroom with a walk in shower, the kind of room a Chelsea home can plan without grout lines

A Chelsea bathroom without grout is usually built from microcement or tadelakt laid over a properly waterproofed wall, with Venetian plaster kept to the areas outside the shower. Zavoré plans these seamless rooms from the substrate up, because the finish is only as reliable as the tanking behind it. Done in that order, a bathroom in a Chelsea townhouse or mansion flat can run from floor to ceiling with no tile joints at all.

This guide explains which finish goes where and why. For how the work is planned and laid, see microcement installation, and for our work in the area, Venetian plastering in Chelsea.

  • Inside the shower, use microcement or tadelakt on a waterproofed wall, not Venetian plaster.
  • The sealer makes microcement washable, but the wall behind a shower still needs tanking.
  • Venetian plaster suits the rest of the bathroom, away from direct water.
  • Seamless walls and floors remove grout lines, which are hard to keep clean.
  • Every room is surveyed and sampled before dates are agreed.

Why do Chelsea homeowners want bathrooms without grout?

Grout lines are where bathrooms age first. They discolour, collect limescale and need regular scrubbing, and in a small en suite they can make the room feel busy. A seamless surface gives a calmer, more spacious feel, which matters in the compact bathrooms of many Chelsea flats and the narrow upper floors of terraced townhouses off the King's Road.

A seamless finish also follows the shape of the room. It can wrap around a bath, into a niche or over a built in bench, so the bathroom reads as one continuous surface rather than a grid of joints.

Which finish works inside a walk in shower?

Inside the shower the wall is wet every day, so the finish has to be one that is designed for it. Microcement is a thin cement based coating that is sealed once laid. The sealer makes it washable and resistant to water on the surface. Tadelakt is a traditional lime finish from Morocco, polished with a stone and treated with soap so that it repels water. Our page on tadelakt installation explains that process in more depth.

Both need the right background. The wall behind a shower still needs tanking, a waterproof layer applied before the decorative finish, so that if water ever finds a way through the surface it cannot reach the structure. Microcement and tadelakt are the visible finish, while the tanking is what protects the house.

Where can Venetian plaster go in a bathroom?

Venetian plaster is not for inside showers. It handles the humidity of a well ventilated bathroom, and a wax adds some protection against splashes, but it is not designed for constant water. It suits the walls outside the wet zone, behind a vanity, around a freestanding bath away from the taps or on the walls of a cloakroom, where its marble look adds depth.

Many seamless bathrooms in Chelsea combine finishes. Microcement or tadelakt lines the shower and perhaps the floor, while a soft Venetian plaster covers the remaining walls. Colours can be tinted to sit together, so the change of material is barely noticed.

What should be checked before a seamless bathroom starts?

At the survey we look at several things that decide how the room is built.

  • The background, whether masonry, plasterboard or old tiles, and how firm it is.
  • Whether the floor has movement, which matters for a seamless floor finish.
  • The shower layout, the falls to the drain and where the tanking must run.
  • Ventilation, since a bathroom that cannot clear steam is hard on any finish.
  • Access in the building, from parking to lifts and permitted working hours.

Plasterboard in bathrooms needs the right board, reinforced joints and the right primer. In older Chelsea houses, existing tiles are sometimes left in place as a base for microcement, but only where they are firmly bonded, and that is decided at the survey.

How is the work planned in a Chelsea home?

Send photos, drawings and rough measurements, then we visit to survey. You approve a sample for each finish and colour, tinted from 48 house colours or any NCS reference. Only after that are dates set. We plan the work in blocks of days so that the same artisans stay on the job throughout, which matters in a seamless room, where every surface must match its neighbour.

Many leases need the freeholder's permission for alterations, and changing a shower layout may count, so check yours. For more detail about microcement in the area, see microcement in Chelsea, and for the wider city, Venetian plastering in London.

New to the material? Read our full guide to what microcement is and where it works, and when you are ready to find the right team, our guide to Venetian plasterers in London.

Questions about seamless bathrooms in Chelsea

Is microcement waterproof on its own?

The sealer makes microcement washable and resistant to water on the surface, but it is not a substitute for tanking. The wall behind a shower still needs a proper waterproof layer before the microcement is laid, so the structure stays protected.

Can tadelakt be used on a shower floor?

Tadelakt is mostly used on walls, basins and baths, where its soft sheen shows well. Floors take more wear and need careful thought about slip and movement. We discuss the floor separately at the survey and suggest what suits your room.

Can Venetian plaster be used in a small en suite?

Yes, on the walls outside the shower, as long as the room is well ventilated. Inside the shower itself, choose microcement or tadelakt on a waterproofed wall. The two can be tinted to sit together so the room still feels seamless.

If you are planning a bathroom without grout in a Chelsea townhouse or flat, send photos, a rough plan and the address to sales@zavore.co.uk or call +44 7592 929191, Monday to Saturday, 9am to 6pm. We will advise on the finishes and arrange a survey.

Back to the Journal

Providing luxury finishes for the most prestigious addresses in the world

Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.

PayPal
© 2026 Zavoré Ltd · Est. 2021 · Made to order in Birmingham
For The Trade Three ways to earn with us
Trade accountTen percent off every material in the shop, and a specialist on the phone. Partners & affiliatesGet listed where customers find you, or sell our materials and earn on every order. The Rewards RoomEvery order earns. Samples, tools and an apron, on the house.
Free to join · we reply within 24 hours
EN