


Short answer. Most limewash paints need two or more coats, while true limewash made from lime putty usually needs three or more very thin coats to build an even colour. Each coat should be dry to the touch before the next, which is often several hours and can mean leaving it overnight. The colour keeps settling for days or weeks afterwards as the lime cures.
Ordinary emulsion is designed to hide what is under it in one or two coats. Limewash works the other way. Each coat is thin and partly see through, and the soft, cloudy look comes from layering. True limewash is the thinnest of all, so it needs the most coats.
Limewash paints are thicker, so they usually need fewer. The exact number depends on the product, the colour and the surface.

Strong or deep colours tend to need more coats than soft whites and stones, because the first coats can look streaky. A very absorbent wall, such as old brick, can also drink the first coat and need an extra one. Always check the instructions on your product. Zavoré's Lime Paint page has the details for that product, and you can ask us if anything is unclear.
Each coat should be dry to the touch before the next goes on. In a warm, airy room that may be a few hours. In a cold or damp room, or outside in cool weather, it can take much longer. Many people leave lime coats overnight.
Do not rush drying with heaters or fans pointed at the wall. Lime that dries too fast can turn powdery. For true limewash, misting the wall with water before each coat helps the new coat bond and dry evenly.
Lime goes on dark and dries much paler. It then keeps settling as it cures, taking in carbon dioxide from the air. This can take days or weeks. Wait until the wall is fully dry before you judge whether it needs another coat or decide the colour is wrong.
Small differences in tone at this stage are normal and are part of the look, so do not add a coat just to make every part match perfectly. Hold off hanging pictures or pushing furniture against fresh walls for a few days so the surface is not marked while it hardens.
Because of drying time, limewash is rarely a one day job. A room with three coats might run over three days or more. Outside, the weather decides the timetable. Our guide on how to apply limewash explains each step.
To see how your colour looks fully dry, order a sample board. For advice, call 07592 929191 or email sales@zavore.co.uk, or read about our limewash installation.
Lime always looks darker wet and dries much paler. Judge the colour only when the wall is fully dry.
Sometimes, in a warm, airy room with a thin product. Wait until the first coat is dry to the touch.
You can lift or drag the coat underneath, which leads to streaks and patches.
An outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
BasementsA guide to decorative finishes for London basements, covering media rooms, gyms and wine rooms, why waterproofing must come first, and wh...
CheshireAn in depth guide to seamless microcement and tadelakt bathrooms for homes across Cheshire, and how to choose between them.
CheshireA guide to polished plaster and other decorative finishes for the large modern homes of Wilmslow and Alderley Edge, and where they fit in...
CheshireChester and the Cheshire countryside are full of timber framed, Georgian and Victorian buildings. This guide explains why lime finishes s...
Greater ManchesterHow microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.