


Venetian plaster is lime and marble, burnished with a blade until it takes a sheen, and it belongs on walls. Microcement is a cement and polymer coating applied in thin layers over a reinforced base and sealed, and it belongs anywhere that has to be continuous, hard and wet: floors, shower enclosures, wet rooms, stairs. The quickest way to decide between them is to ask what the surface has to survive. If the answer is daylight and the occasional shoulder, use Venetian plaster. If the answer is feet, water or both, use microcement.
Zavoré lays this for you too. Our own team provides microcement installation across the UK.
We lay both from Birmingham, and most of the jobs we do use one for the walls and the other for the floor. They are complements far more often than they are rivals.
Venetian plaster, stucco veneziano, sold in Britain as polished plaster, is slaked lime putty with finely milled marble in it. Several very thin coats, then compression with a clean blade. The sheen comes from burnishing, not from an added gloss, and the depth comes from light passing into a translucent mineral surface. It cures by carbonation and keeps hardening for weeks. See the polished plaster page for the range.
Microcement is a fine cement system with a polymer modifier, laid over a primer and a reinforcing mesh in layers thin enough to go on top of an existing floor or wall, then sealed. It sets by hydration. The sealer, not the microcement, is what resists water and staining. The microcement page covers where we use it.
| Surface | What we would use | Why |
|---|---|---|
| Living room walls | Venetian plaster | Depth and movement; no water, low abuse |
| Bedroom walls | Venetian plaster | Soft light, quiet colour, breathable |
| Hallway and stair walls | Venetian plaster, sealed | Repairable and blendable when scuffed |
| Hallway and stair floors | Microcement | Seamless, abrasion resistant |
| Kitchen walls | Either | Plaster for warmth, microcement for a concrete scheme |
| Splashbacks | Microcement, or tadelakt | Constant wiping and splashing |
| Worktops | Microcement | Only one of the two rated for that abuse |
| Bathroom walls, dry zones | Venetian plaster, sealed | Lime handles humidity well |
| Inside a shower | Microcement over tanking | Direct water every day |
| Bathroom and wet room floors | Microcement | Continuous, with falls formed in |
| Commercial walls | Venetian plaster | Looks the part and can be patched in place |
| Commercial floors | Microcement | Takes traffic; sealer chosen for the use |
Neither material is a waterproofing system, and this is where most of the bad advice on the internet lives.
Lime Venetian plaster is a mineral surface. It tolerates humidity very well, it is naturally alkaline so mould does not like it, and with a sealer (£25) it will happily live on a bathroom wall outside the splash zone for years. It is not designed to take a shower head pointed at it, and we do not specify it inside an enclosure. Our Venetian plaster bathroom guide sets out exactly which zones it belongs in.
Microcement is the finish for wet areas, but the waterproofing goes on underneath it. The tanking membrane keeps water out of the structure. The microcement is what you see, and its sealer keeps water out of the microcement. If someone offers to microcement a shower without tanking behind it, that is not a shortcut, it is a leak with a delay on it.
For a shower specifically, the third option is tadelakt, which repels water through a soap and polish finish rather than a resin film. It is a genuine contender and we sell the material.
These two do not look remotely alike, which makes the choice easier than the technical comparison suggests.
Venetian plaster is reflective and alive. Cloudy depth, tonal drift, a sheen anywhere from satin to near mirror, and a surface that changes as the light moves across it during the day. It reads as polished stone, and in a scheme with texture, timber or pattern in it, it is the warmer choice. Because it is tinted through the body of the material, the colour has substance rather than sitting on the surface as a film.
Microcement is calm and flat. Slight cloudiness from the trowel, minimal sheen unless the sealer adds one, and a cool, dense, very smooth surface. Its strength is continuity: no joints, no grout lines, one material running from wall to floor. That is why it suits minimal and concrete led interiors, and why it looks out of place in a period room. If you are weighing it against a tiled surface, microcement vs tiles is the comparison to read.
On walls, Venetian plaster is normally the cheaper installed finish. The build up is thinner, there is no mesh, and the labour, while skilled, is fewer stages. On floors there is no comparison to make, because only one of them goes on a floor.
What drives a microcement price is almost always the substrate. A rigid, flat, stable floor is straightforward. A floor that flexes, a screed that is cracked, or a room where levels have to be built up are all real work before any finish goes down, and nobody can price that from a photograph. We do not quote per square metre without seeing the job, and we explain why in polished plaster cost in the UK.
We supply Venetian plaster. Veneziano is £200 for 24kg for the polished finish and Veneziano Metallico is £175 for 20kg for the same finish with a metallic shimmer, both tinted to your colour in the tub. UK delivery is priced at checkout by weight; international orders are quoted, so email sales@zavore.co.uk before ordering.
We supply and install microcement, but the Zavoré Academy does not run a microcement course. Our courses cover the lime finishes we supply. If you want microcement in your house, the route is the installation page or 07592 929191.
No. It is a wall finish, thin and lime bound, and it is not made for footfall, abrasion or water sitting on it. Sealing it does not change what it is. For a seamless bathroom floor the answer is microcement laid over correct waterproofing, with the falls formed in the substrate rather than in the finish.
Yes, and it is our most common bathroom specification: microcement on the floor and inside the shower, Venetian plaster on the remaining walls, with the colours chosen to sit together rather than match. It gives you the waterproof surfaces where they are needed and the better looking wall everywhere else.
Both outlast paint by a long way, and they fail differently. Lime keeps hardening with age and can be cut in and blended when it chips. Microcement is harder and more abrasion resistant, but its sealer is a wearing layer that dulls in traffic and needs reinstating. Neither is maintenance free; both are repairable.
No, though they chase a similar look. Microcement is cement based and rated for floors and wet areas. A concrete effect decorative plaster is a lime or mineral wall finish that imitates poured concrete, for walls only. If you want the appearance on a wall and nothing more, the concrete effect route is thinner, lighter and simpler.
Where to go next: for walls, the polished plaster page and a tinted sample board seen in the room. For floors and wet areas, the microcement page and a look at the substrate before anyone talks money. If the job is both, ring us and we will sequence it properly.
For a closer look at the matt lime option, read our comparison of marmorino and microcement, room by room.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.