


Decorative plaster is the family of hand applied lime and mineral wall finishes that are laid as the final surface, with no paint over the top. Veneziano, Marmorino, limewash, Tadelakt, microcement, metallics and sculpted rock all belong to it. What unites them is that the colour, the texture and the sheen are built into the material itself rather than rolled on afterwards, and that the surface is worked by hand while it is wet. This guide explains what decorative plaster is, how the main families differ, and how to pick the right one for a wall. To see every finish we supply, install and teach, start with Zavoré decorative plaster and wall finishes.
Venetian plaster is what Zavoré supplies, installs and teaches, and our own team provides Venetian plaster installation across the UK.
We supply these materials and lay them ourselves from Birmingham, so what follows is how we actually sort them out when someone rings up and says they want “that Italian plaster look”.
Ordinary plaster is a substrate. It is there to give you a flat, sound background for paint or paper, and it is judged on how invisible it is. Decorative plaster is the opposite: it is the finish, it is judged on how it looks, and nothing goes over it but a wax or a sealer.
Three practical differences follow from that.
The best known branch. Slaked lime and graded marble dust, burnished with a steel trowel until the surface closes and the marble catches light from within.
Polished plaster is the high gloss end: fine grain, deep reflection, the look people mean when they say Venetian. Marmorino uses a coarser marble and stops short of a mirror, giving a soft stone sheen with visible trowel movement. Travertino is worked to imitate the pitted, banded face of cut travertine. Veneziano for the mirror finish and Dolomiti Stucco for a heavier stone look are both £200 for 24kg.
These belong on walls people see up close: hallways, living rooms, reception areas, stair cores. They take a knock better than paint and they can be repolished rather than repainted.
Same binder, different intent. Instead of closing the surface you leave it open and let the aggregate show.
Intonachino and Dilavato give a fine sand or washed stone texture that reads as rendered masonry indoors. Limewash is the thinnest member of the family: a brushed lime paint that dries to a cloudy, chalky bloom with no texture at all, and the cheapest way into a lime finish at £47 for 14 litres. Clay plaster swaps lime for clay and gives a warm, completely matt surface with a faint earth grain.
Choose these when you want depth without shine, when the wall is long and you do not want reflections tracking across it, or when the building is old and needs something breathable.
Tadelakt is Moroccan lime plaster compressed with a stone and cured with olive oil soap until it is seamless and water resistant. It is the one decorative plaster you can put in a shower with no tile and no joints, which is why it turns up in wet rooms, sinks and steam rooms. It is also the slowest and most demanding to lay, and the material reflects that at £145 for 16kg.
Microcement is a polymer modified cement coating, not a lime plaster. It is harder, it bonds over tile and it goes on floors as well as walls, and that makes it the usual choice for bathroom floors, stairs and commercial circulation. Concrete effect finishes such as Beton Stucco chase the look of poured concrete, pour marks, tonal drift, formwork shadows, in a material thin enough to go on a plasterboard wall.
Liquid Metal finishes carry real metal powder or pearl pigment, so the wall changes as you walk past it rather than sitting at one flat tone. They range from a whisper of shimmer in a burnished lime to a full brass or bronze face.
Artificial rock is the sculptural end: plaster built up over a form and carved, so a stud wall becomes a rock face. It belongs in bars, spas and fireplaces, and it is a different skill from flat work.
| If you want | Look at | Sheen |
|---|---|---|
| Marble, depth, reflection | Polished plaster | High gloss |
| Stone with trowel movement | Marmorino, Travertino | Soft sheen |
| Old, chalky, breathable walls | Limewash, clay plaster | Matt |
| A shower with no tile | Tadelakt | Low sheen |
| Floors and over tile | Microcement | Matt to satin |
| Raw concrete, industrial | Concrete effect | Matt |
| Light that moves | Metallics | Variable |
Work backwards from three questions. Where is the water? Anything permanently wet points to Tadelakt or microcement. How much light hits the wall, and from what angle? Low side light from a window or a downlight exaggerates every trowel mark, which flatters Marmorino and punishes a poor mirror polish. And how close will people stand? A hallway wall people brush past wants a closed, burnished surface; a double height atrium can carry texture that would look coarse at arm’s length.
Colour comes after the finish, not before. The same tint reads differently in a matt lime and a burnished one, which is why we send sample boards rather than a colour card.
Venetian plaster is one branch of decorative plaster: the burnished lime and marble dust finishes from Venice. Decorative plaster is the whole family, which also takes in limewash, clay, Tadelakt, microcement, metallics and sculpted rock. All Venetian plaster is decorative plaster; most decorative plaster is not Venetian. Our guide to Venetian plaster covers that branch in detail.
Usually yes, provided the wall is sound, flat and primed. Fresh plasterboard, skimmed walls and sound old paint all take it once the right primer is on. Uneven or hollow walls need making good first, because these finishes are thin and will follow whatever is underneath rather than hide it.
The material costs more per square metre and the labour costs a great deal more, because it is laid by hand in multiple passes by someone trained to do it. Against that it lasts far longer than a paint cycle, it can be repaired and repolished, and it is a finished surface rather than a decorated one. The cost guide gives the honest numbers.
Lime finishes are laid thin over a stable background, so they move with the wall rather than against it. Cracks almost always come from the substrate: movement in the building, a board joint that was not taped, or a base coat that was too thick or dried too fast. Fix the background and the finish stays sound for decades.
Where to go next: browse the finishes and order a sample from the shop, or ring us on 07592 929191 if you would rather describe the room and let us tell you which of these belongs on it.
How microcement floors work in kitchen extensions across Greater Manchester, from the screed underneath to underfloor heating and everyda...
Buying GuideA product by product guide to the protective finishes in the Zavoré shop and which plaster each one is made for.
CommercialWhat London restaurant, bar and hotel operators should know about decorative plaster. Which finishes stand up to busy service, out of hou...
BirminghamFor people thinking about leaving another job for decorative plastering. What a beginner course at the Zavoré Academy covers, the gap bet...
TadelaktAn in depth guide to tadelakt, the polished Moroccan lime plaster, for bathrooms and wet rooms in Welsh homes, cottages and holiday lets.
DubaiHow polished plaster works on staircases and lift lobbies in Dubai villas, from tall stair walls and handrail fixings to protecting busy ...
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.