


Real slaked lime, brushed on in thin crossing strokes so the wall clouds and moves with the light. We install limewash across Al Ain and anywhere in the UAE.
Limewash in Al Ain feels natural in a city that grew from mud brick, palm groves and thick lime and earth walls. Zavoré supplies, installs and teaches it, and our artisans install limewash all over Al Ain and anywhere in the UAE. It is slaked lime thinned with water and brushed on, and as it dries it carbonates back to stone, leaving a soft, cloudy, matt surface. Start by sending a photo of the wall and a few rough measurements.
Look at the restored forts and old houses around the Al Ain Oasis, Al Qattara and Hili and you see the honest texture of hand finished walls, matt and slightly uneven, shifting from sand to warm white through the day. Limewash carries that character into modern homes. It suits villas in Al Jimi and Al Mutawaa where owners want a calm, earthy interior, and the farm houses on the edge of the city where families gather in courtyards shaded by date palms.
Lime breathes, which is why it belongs on solid masonry, render and block rather than over a sealed modern surface. Many Al Ain homes are built in block and render, which takes limewash well once any old film of paint has been dealt with. Inside, it gives a majlis or a bedroom a quiet depth that flat paint lacks. Outside, on a courtyard or boundary wall, it weathers slowly instead of peeling.
Good places are courtyard and garden walls, entrance halls and stairwells that want texture rather than sheen, bedrooms and family rooms in earthy colours, and the long plain walls of a farm house majlis. Restaurants and cafés that want a warm backdrop use it too. Our limewash page goes deeper into the material.
It is the wrong choice for a kitchen splashback, a shower, or any wall that is handled daily, because it marks and cannot be scrubbed. It will not grip vinyl silk, gloss or a sealed skim unless the wall is stripped first. And if you want a perfectly even colour with no movement, limewash is not the finish for you.
Send photos, drawings if you have them and rough measurements. We go through them and then survey the walls before quoting, checking what is on the surface now and whether it will take lime. At that visit we also talk through the climate, the building and how each room is used. A hand brushed sample in your colour comes next, and once it is approved the limewash is tinted to match before it ships.
On the day the wall is dampened so the lime does not flash off, then brushed in loose crossing strokes, two or three thin coats with drying time between. Lime is caustic while wet, so the room is protected and the artisans work with gloves and goggles. Work is planned in blocks of days so the same artisans keep a wet edge across each wall. Read more on our limewash installation page.
Limewash is supplied from the UK in its maker's own colour range, which runs to earths, ochres, umbers and soft greys, and it is tinted to your approved sample before shipping. It travels to your Al Ain address on a tracked service, delivery is quoted by email, and any import duty is set by the UAE and paid by the buyer. Find it in the shop.
It is also the finish we most happily teach. Our limewash course is taught in person in the UK at our training centres. Students travel from abroad for it, and an airport or station pickup can be arranged as part of the booking.
For a matt wall with more body, clay plaster in Al Ain gives the Roman clay look in fine lime, and marmorino in Al Ain adds a satin stone grain. Where a wall should shine, polished plaster in Al Ain is the marble look. Bathrooms and floors are better served by tadelakt in Al Ain and microcement in Al Ain, a modern grey by concrete effect plaster in Al Ain, and a glint by liquid metal in Al Ain. See also Venetian plastering in Al Ain, Venetian plastering in the UAE and our decorative finishes specialist in Al Ain page.
Yes. We install limewash in every district of Al Ain and wherever else you are in the UAE. Send photos, rough measurements and the address and we will plan the survey.
Not directly. Lime needs an absorbent mineral surface, and on vinyl or acrylic emulsion it simply dusts off. The wall is either stripped back or given a mineral primer first, which we check at the survey.
No. It is a soft mineral surface and it will mark. The trade off is that it repairs invisibly, because a thin coat brushed over a scuff blends in. For a splashback or shower, tadelakt or microcement is the better choice.
Two at least and usually three, each one thin. The colour builds slowly and keeps settling for a few weeks as the lime turns back to stone.
Talk to us on +44 7592 929191, Monday to Saturday, 9am to 6pm UK time, or email sales@zavore.co.uk with photos, rough measurements and the address. Limewash dries lighter than it looks wet, so judge the colour on a dry sample board in daylight.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Al Ain and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.