


Real slaked lime brushed on in soft, cloudy coats by our own applicators who travel from Birmingham.
Limewash in Manchester belongs on solid brick walls that need to breathe, and there are a great many of them. Zavoré is based in Birmingham, and our own applicators travel to Manchester to brush real slaked lime onto walls in thin, cloudy coats. We survey the wall first, because what is already on it decides whether lime will hold, and we start with a hand brushed sample board in your colour.
Much of Manchester was built in brick, and the Victorian and Edwardian terraces of Chorlton, Withington, Levenshulme and Fallowfield are the clearest example. Their walls are solid, not cavity, and for a century they have moved moisture in and out through lime plaster and old brickwork. Modern vinyl emulsion can sit on top of that and trap what the wall is trying to release.
Limewash works the other way. It is slaked lime thinned with water and brushed on. It soaks into the wall, stays vapour open and carbonates back to stone over a few weeks. That is why it suits bare lime plaster, old render, solid brick and unsealed plaster so well, and why it never flakes. It ages and weathers instead of peeling.
There is a limit, and we are plain about it. Limewash is not a cure for damp. If a wall is wet because of a failed gutter, a blocked drain or rising water at ground level, that has to be fixed at the source first. Lime lets a sound wall breathe. It cannot hold back water that should not be there.
Hallways and stairwells that want texture, not sheen. Bedrooms and snugs in earthy, muted colour. Chimney breasts and the walls beside them. Front rooms in period houses where flat emulsion has always looked lifeless. On a big wall, the brush marks and soft cloud do what a roller never can. Our limewash finishes page goes into the palette, which runs to earths, ochres, umbers and soft greys, because lime only holds pigments that survive its alkalinity.
It is the wrong finish for a kitchen splashback, a shower or any wall that gets handled every day. Limewash is soft, it marks if you rub it, and a wet cloth on a scuff usually leaves a paler patch. For wet areas we would point you towards tadelakt or microcement instead. The upside is that repair is easy. A thin coat brushed over the damaged area blends in where emulsion would leave a rectangle.
Lime needs something mineral and absorbent to grip. Bare brick, lime plaster and unsealed plaster take it well. A fresh skim will take it too, though it drinks unevenly and wants a mist coat of thinned limewash first. What it will not do is sit on vinyl silk, gloss or a sealed skim, where it dusts off. Many Manchester houses have been repainted several times, so the first job at survey is often finding out what is really there. A simple test is to wet a patch and see whether it drinks or beads.
Where there is a film we strip it back or use a mineral primer. Lime is also caustic while wet, so we protect floors, joinery and glazing carefully. Two coats at minimum, usually three, each very thin and each left to dry fully before the next.
We survey the walls, ideally with photos beforehand, and a sample board in your colour is brushed so you can judge it dry and in daylight, never wet. Limewash dries lighter than it looks on the brush and keeps shifting for a few weeks. We tint to the approved sample before the material leaves Birmingham.
Manchester is a fair distance from Birmingham, so the work is planned in blocks of days, with the team staying on site and keeping a wet edge across each wall rather than leaving joins to dry halfway. Dates are agreed once the sample and price are signed off. More about the process is on the limewash installation page, and you can order a sample board at any time.
Real slaked lime limewash is also sold in our shop, with a mineral primer for walls that will not take lime alone, and tracked delivery across the UK. Decorators and contractors can ask about a trade account.
Limewash is one of several finishes that work on older walls, and your house may want a mix. See clay plaster in Manchester, marmorino in Manchester, polished plaster in Manchester, tadelakt in Manchester, microcement in Manchester, concrete effect plaster in Manchester, liquid metal in Manchester and decorative specialists in Manchester. For the classic polished lime finish, see Venetian plastering in Manchester.
Not directly. Lime needs an absorbent mineral surface, and emulsion leaves a film that the lime cannot grip, so it dusts off. The wall is either stripped back to bare plaster or brick, or a mineral primer goes on first. If you are unsure what is on the wall, wet a patch and see whether it drinks or beads.
Only once the cause of the damp is dealt with. Limewash is vapour open, so it lets a sound solid wall breathe, but it cannot cure a leaking gutter or a bridged damp course. Fix the source, let the wall dry, then lime it.
Two as a minimum and three most of the time. Each coat is far thinner than paint and looks like dirty water going on, which puts some people off. The colour builds slowly and should be judged only when the last coat is fully dry.
No. It is a soft mineral surface and it will mark. The trade off is that it repairs almost invisibly with a thin coat. For a bathroom or a kitchen splashback, tadelakt or microcement is the sensible route.
Usually, yes. Many tins are emulsion with a chalky finish. Real limewash is slaked lime and water, soaks in rather than sitting on the surface and carbonates back to stone.
Ring 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and your Manchester postcode. If you would rather start with the material in your hand, order a sample board.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Manchester and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.