


A burnished lime and marble wall that reads like polished stone. We install polished plaster across Ajman and anywhere in the UAE.
If you want polished plaster in Ajman, a wall that shines like honed marble rather than painted board, Zavoré supplies it, installs it and teaches it. We install polished plaster all over Ajman and anywhere in the UAE, from a single feature wall in a creek view apartment to a full villa entrance hall. Start by sending photos of the walls with rough measurements, and we will tell you what they need.
The towers along Ajman Corniche and around the creek are full of living rooms with wide glazing and sea light pouring in. Polished plaster loves that kind of room. Because the coats are translucent and burnished, the wall changes as daylight turns and as you walk past it, deeper in the evening and brighter at noon.
In the villa districts the opportunity is scale. Homes in Al Rawda, Al Mowaihat and Al Yasmeen often have a double height entrance hall with a staircase rising through it, and that tall wall is the natural place for a polished surface. A dark stone colour there gives the house weight from the front door. Newer villas around Al Zorah and Al Helio tend to have cleaner lines and plasterboard walls, and a polished feature behind the main sofa or a fireplace wall suits them well.
Good homes for it include entrance halls, formal dining rooms, majlis feature walls, the wall behind a bed, and corridors in hotels and offices where people pass at an angle and see the shine move. Hotel lobbies and reception walls on the seafront use it the same way. Our polished plaster page explains how the coats build up.
There are places to avoid. Polished plaster does not belong inside a shower or a steam room, directly behind a hob, or on a wall that still moves. It is also the least forgiving finish over a wavy wall, so preparation comes first.
We install in every part of Ajman. Send photos, drawings and rough measurements first. We then survey the walls before giving a price, since a reflective finish depends on what is behind it. In newer towers that usually means plasterboard, and the joints need reinforcing and the right primer before any lime goes on.
A sample is made in your chosen colour and you approve it in the room. The material is tinted to that sample before it ships, then dates are fixed. We plan the work in blocks of days so the same artisans lay each coat, burnish it at the right point and wax it last. At the survey we talk through the climate, the building and how the room is used. Read the Venetian plaster installation page for the full sequence.
If your fit out contractor in Ajman has applicators, you can buy the material on its own. It is supplied from the UK in 48 house colours or any NCS reference, tinted to your sample and sent to your address on a tracked service. Delivery is quoted by email, and any import duty is set by the UAE and paid by the buyer. Order through the shop.
Burnishing is the hardest part, with a short window on each patch. Our courses are taught in person in the UK, at the Zavoré Academy in Birmingham and at our London and Manchester training centres. The Beginner Course runs three days, the Advanced Course four and 1 to 1 Training three, with every material included. Students come from abroad, and airport or station pickup can be arranged when you book. See our training courses.
A burnished wall pairs well with a quieter one. Marmorino in Ajman gives a satin with visible grain, and limewash in Ajman a soft matt cloud. For bathrooms look at tadelakt in Ajman, and for seamless floors microcement in Ajman, which we install. Chalky walls come from clay plaster in Ajman, a cooler grey from concrete effect plaster in Ajman, and shimmer from liquid metal in Ajman. Our decorative finishes specialist page for Ajman shows the whole range, while Venetian plastering in Ajman and Venetian plastering across the UAE cover the classic finish.
Yes. We install polished plaster across Ajman, in the towers, the villa districts and out at Masfout, and anywhere in the UAE. Email photos and rough measurements and we will arrange a survey.
Very flat. A burnished surface reflects, and a reflection finds every hollow and patched chase that matt paint hides. We survey first and say honestly if a wall needs skimming before we start.
In look, yes. It is lime with marble ground to a fine powder, laid in thin translucent coats and burnished until it shines, so the wall reads like polished stone without slabs or joints.
No. Standing water and steam belong to tadelakt or microcement on a waterproofed wall. On the dry walls of a bathroom polished plaster is fine.
Phone +44 7592 929191, Monday to Saturday from 9am to 6pm UK time, or write to sales@zavore.co.uk with photos, rough measurements and the address. Put a sample board against the wall in the real light before you commit a whole room.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Ajman and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.