


Burnished, soaped lime for showers and wet rooms, built to cope with chalky Kent water on small Victorian bathrooms and converted barns alike.
Tadelakt in Kent means burnished, soaped lime on the walls of a shower, wet room or bathroom, with no grout to go black and no silicone to peel. Zavoré supplies and installs it, and our own team travels from Birmingham to lay it. It suits the small Victorian bathrooms, barn conversion en suites and country house spa rooms of the county, and it asks for one thing above all, a properly prepared and tanked wall. A sample board in your colour is the place to start.
Much of Kent sits on or beside chalk, and the water in the county is hard. That matters for tadelakt more than for tile. Limescale builds up on any shower wall, and the usual cure, a limescale spray, is acidic and attacks lime. A tadelakt bathroom is looked after with mild soap and a squeegee, and it is re soaped now and then. If a household is going to reach for the bleach and the scale remover every week, tadelakt is the wrong finish and we would say so.
Then there are the buildings. Victorian and Edwardian terraces across the county towns and the seaside towns often have a bathroom squeezed into a back bedroom or an extension, with suspended timber floors and stud walls. Tadelakt follows whatever is under it, so a flexing wall or a springy floor is put right first. Barn and oast conversions are the opposite problem. They have fine thick walls, new plasterboard partitions and a bathroom that wants a spa feel. Bare plasterboard in a wet area is not a base for lime. It needs tanking and a rendered base built up over it before any tadelakt goes on.
Older solid walled houses suit the finish for another reason. Tadelakt is breathable, so a lime built Kent farmhouse or cottage does not have a film sealed over its walls.
Our tadelakt finishes work well where water meets a wall and you want one soft surface.
We would not put it on a busy floor, on untanked plasterboard or anywhere you want sharp, straight edges. The colours are lime fast earths, clay reds, ochres, olive greens, off whites and charcoals. Expect variation, because two panels burnished on different days will not match exactly.
We survey first, looking at the wall, the waterproofing, the base and how the room will be used. If it needs tanking or rendering we say so before pricing. The sample board lets you judge the sheen and colour in the bathroom itself. The material is tinted before it leaves Birmingham.
Burnishing cannot be rushed and the rendered base comes first, so a bathroom is a planned job. Kent is well beyond a daily trip from Birmingham, so the work is planned in blocks of days, with the team staying on to lay and burnish each stage in order. Dates are agreed once the sample and price are signed off. The tadelakt installation page explains the process.
The shop sells the plaster, the finishing soap and olive oil soap for ongoing care, all with tracked UK delivery. Be honest with yourself about the skill. It is the hardest finish we stock, with a short window for the stone work, so most buyers have us lay it. Plasterers and builders can ask about a trade account, and our training in Birmingham is open to people who want to learn lime work.
Day to day the care is simple. Wipe the shower down, keep acids and scouring pads away and re soap when it dulls.
For a drier room, microcement in Kent gives a seamless surface of its own, while limewash in Kent and clay plaster in Kent suit the bedrooms next door. marmorino in Kent and polished plaster in Kent work on bathroom walls away from the shower. Bolder walls come from concrete effect plaster in Kent and liquid metal in Kent. The whole range is in decorative specialists in Kent, and the classic is Venetian plastering in Kent.
It does mean limescale, so the cleaning routine matters. Wipe or squeegee the wall after use, wash with mild soap and re soap now and then. Limescale sprays and bleach attack lime, so avoid them.
Yes, and it suits the character of the building. The wall behind it must be tanked and rendered properly first, because bare plasterboard is not a base for lime in a wet area. We check the wall on a survey.
Burnished and soaped properly, it repels water, but it sits on a tanked, correctly built wall exactly as tile would. A loft needs the structure, the floor and the tanking to be right before the lime goes on.
Often it does well, because curves and niches suit tight rooms and there is no grout to clean. We check the stud walls and the floor for movement first, since tadelakt follows what is under it.
Tell us about the bathroom and the wall behind it, and we will say what it needs. Call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and your postcode. You can also order a sample board and start from there.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Kent and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.