


Polished lime that sheds water without a film on top, burnished by hand in Nottingham showers and wet rooms and built on a properly prepared wall.
Tadelakt in Nottingham is polished lime plaster, burnished with a stone and then soaped, which makes a wall water resistant without any film or sealer on top. Zavoré is based in Birmingham and our own applicators travel to Nottingham to burnish it. It is the traditional finish for showers and wet rooms, and it only works on a wall that has been built correctly behind it. So we start with the wall and then move to the sample board.
Send photos of the bathroom, or call, and tell us what the walls are made of. Everything else follows from that.
Nottingham bathrooms come in three broad kinds. Victorian terraces in Sherwood, Lenton and Sneinton often have a small bathroom at the back or an en suite squeezed into the loft, with awkward corners and sloping ceilings. The big villas of the Park Estate and Mapperley Park have room for a proper wet room. Newer apartments by the canal and the Trent come with plasterboard walls and a ready made shower tray.
Tadelakt handles the awkward ones well. It has no tile edges to trim round a slope, and it runs into a niche, over a bench and around a curve as one surface. It suits the loft en suite and the villa wet room alike. The new apartment is the harder case, because plasterboard on its own is not a bed for it.
Tadelakt is the visible part of a system, not a waterproofing layer by itself. It wants a mineral, absorbent, stable base such as a sand and cement render or a lime render, and the wall behind a shower is tanked first, exactly as it would be under tile.
Plasterboard on its own is not enough in a wet area. It needs tanking and a suitable rendered base built up over it before any lime goes on. A modern skim is a poor bed and we would not work over one in a shower. Corners are formed rounded rather than sharp, because a stone cannot burnish into a right angle, and that soft detail is part of why the finish looks as it does. Get the render flat and true first, because tadelakt follows whatever is under it.
Our guide to tadelakt finishes covers the material in full. In Nottingham the uses we see most are these.
It is the wrong choice on a floor that takes heavy traffic, or anywhere sharp straight lines are the point. Colour comes from lime fast pigments, so expect clay reds, ochres, olive greens, plaster pinks, off whites and charcoals rather than anything vivid. The surface is a soft sheen with faint mottling, and two panels burnished on different days will not match exactly. The joins are part of the character. If that idea worries you, tadelakt is probably the wrong finish, and we would rather say so now.
Tadelakt is maintained with mild soap, not chemicals. Limescale remover, bleach, bathroom sprays and scouring pads all attack lime. Wipe the shower down after use and it stays well. If a patch dulls or is marked it is re soaped and re polished in place rather than cut out, and every few years a wall benefits from a fresh soaping that you can do yourself.
We survey first. That covers what the walls are made of, flatness, damp, movement and how the bathroom is used, plus access and protection. We say plainly if a wall needs stripping, rendering or tanking before the lime goes on.
Colour is agreed on a burnished sample, and the plaster is tinted to the approved sample before it leaves Birmingham, in our 48 house colours. Burnishing has a short window on each patch, so the job is planned in blocks of days, with the team staying on site and working in order. Dates are agreed once the sample and price are signed off. See the tadelakt installation page for the steps.
Tadelakt is the hardest finish we stock, and a shower that has not been closed properly will wet through, and you only find out later. For a bathroom you use daily, we would ask you to leave it to us. If you want the material for a project of your own, the shop sells the plaster tinted to colour, finishing soap for pale and dark shades, and Marseille soap for ongoing care, shipped tracked across the UK. Trade buyers can ask about a trade account.
A wet room is one part of a house. For hallways that reflect, see polished plaster in Nottingham, and for stone grain on a whole room, marmorino in Nottingham. Seamless floors and showers in a different material are covered by microcement in Nottingham. For breathable colour on brick try limewash in Nottingham, and for soft matt walls clay plaster in Nottingham. The cool grey wall is concrete effect plaster in Nottingham and the shimmer is liquid metal in Nottingham. Our whole range sits under decorative specialists in Nottingham, and the area guide covers Venetian plastering in Nottingham.
Yes, if the wall is built for it. The shower wall is tanked and given a rendered, absorbent base before the lime goes on, and the corners are rounded. We look at the stud walls and the floor on the survey and say honestly if the build up will work.
Not directly, and not in a wet area without more work. It needs an absorbent mineral base, so a shower wall is tanked and then rendered first. In a dry room a suitable rendered or lime base over board can work, but a bare modern skim is not a bed we would use.
With mild soap and water and nothing else. Avoid bleach, limescale removers, bathroom sprays and anything abrasive. Wipe or squeegee the shower after use, and give the wall a fresh soaping now and then to feed the surface.
Not exactly, and that is part of the finish. Tadelakt is burnished by hand, so there is gentle mottling and variation, and panels done on different days will differ slightly. A burnished sample board shows you the range before you commit.
For a bathroom you use daily, tell us what the walls are. Call 07592 929191 (Monday to Saturday, 9am to 6pm) or email sales@zavore.co.uk with photos, rough measurements and your postcode. You can also order a sample board and start from there.
Order a sample board tinted to your colour, or send photos and rough measurements of the walls in Nottingham and we will come back to you with the right finish and a clear quote.
For a quote, email photos and measurements of your walls to sales@zavore.co.uk or call 07592 929191, Monday to Saturday, 9am to 6pm.
See every area we cover.
Our main services: Venetian plaster installation, limewash installation, every decorative installation, Venetian plastering courses, the limewash course and our decorative finishes.
We also supply the trade by post, wherever you are. The shop ships tracked across the UK, and the Academy teaches the finishes in Birmingham, London and Manchester.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.